Specialty Microscope Slides

Quartz Glass Microscope Slides

Quartz Glass Microscope Slides and Cover Slips are a necessity for microscopy applications where UV transparency is needed. They can also be used for high end microscopy applications to reduce signal loss due to absorption. Other applications can involve UV radiation transparency. The quartz slides can also be used for high temperature applications up to 1250°C (2282°F). Above this temperature the material will start to soften. The quartz material used to manufacture our high quality quartz microscope slides and coverslips is the GE 124 type high purity fused quartz, a well documented quartz used over decades in microscopy applications. Technical information about GE 124 Quartz.

Transparency is provided for 0.19 to 4.2um with very low absorbance in the 0.26 to 2.6um range. Surface flatness is ±1 degree with 60/40 scratch/dig specifications. Quartz Microscope Slides are available in the standard 1mm thickness and sizes of 3"x2", 3"x1", 2"x1" and 1"x1". Quartz coverslips are available in several sizes and thicknesses, although for most microscopy applications the 0.25mm thickness is adequate. Tolerance is +/- 0.005" (127um).

Petrographic Microscope Slides, 46 x 27mm

Plain glass slides made from the finest quality non-corrosive white glass.
Edges are precision ground and polished. Each box contains 72 slides.

Size: 46 x 27 x 1.2mm (1-7/8 x 1-1/16 x 1/16")

PELCO® GEOSLIDES Petrographic Slide Storage Boxes

Thin sections made from rocks, minerals, cement/concrete, construction and building materials, and bone are mounted with epoxy, Crystalbond™ or Mounting Media onto a 46 x 27mm glass slide for routine petrography, reflected and transmitted light microscopy, EPMA, SEM/EDS, automated mineralogy, cathodoluminescence (CL) and EBSD analyses. Coverslips reduce light scattering effects due to remnant pits and scratches formed in polishing steps. Uncovered thin sections can be coated with oil, Histomount™ or clear nail polish prior to analyses.

Treated Plastic Microscope Slides

75 x 25 x 1.1mm

These versatile, low-cost microscope slides can be used wherever glass slides are used, including sample preparation in the field. They are safer than glass slides because they are more impact resistant than ordinary glass slides. Plastic slides do not leave any sharp edges when broken.

Two versions of plastic microscope slides are offered. One is made of general purpose "crystal" polystyrene and the other is made of UVT (UV Transmittable) acrylic. Their transparency and optical quality are identical to viewing through a flat-bottom microplate well.

• Cell and tissue culture studies.
• Immunofluorescence and immunostaining for cytology, histology, parasitology, bacteriology and virology, etc.
• Immobilization of DNA, nucleic acids, antibodies, proteins and other small molecules.
• Protein printing and microarrays.
• Hybridization studies.

These slides are produced under rigorous quality control conditions for clean and uniform surfaces with low background readings. They have enhanced protein binding characteristics. They are RNase and DNase free.

The slides are not resistant to the following chemicals: ethanol, methanol, phenol, organic acids (e.g., acetic acid), gasoline, aromatic solvents (e.g., benzene, toluene, xylene and turpentine), chlorinated hydrocarbons (e.g., methylene chloride and tetrachloromethane), ketones and others.

NEW Polysine™ Slides

Polysine™ Slides provide superior cell and tissue adhesion. These slides are most useful for applications of frozen and paraffin embedded tissue sections and cytology specimen preparations.  The tissue adhesion is not affected by chemical exposure, enzyme pre-digestion or heating.

Size: 25 x 75mm.

• Polysine™ places an advanced permanent adhesive on the microscope slide
• Built-in chemicals electrostatically and chemically attract tissues and cells

Spot Slides Multi-Well Microscope Slides

Made from clear soda lime corrosion resistant glass. Precleaned slides with a size of 3 x 1" (76.2 x 25.4mm and a 1-1.2mm thickness) and a coating thickness of 0.130mm. Ground edges with 90 degree corners. No notable interference from UV absorption or reflection in the 250-350nm range (tested with 280nm).

The technically advanced hydrophobic coating prevents cross contamination by keeping fluids in the well area. Features include: super hydrophobic printed mask with clean wettable wells. The printed mask is an epoxy ink with PTFE.  This coating thickness is 0.130mm.

• Hydrophobic microscope slides used in immunofluorescence, DNA and histology applications.
• Durable printed surface inert to common laboratory chemicals and reagents.
• Acetone resistant

NEW Cavity Microscope Slides

Cavity Microscope Slides with precisely ground and polished spherical depressions or cavities. Also known as depression, concavity, or well slides. The concave wells are particularly useful for holding liquid samples and tissue cultures. Slide dimensions are 3 x 1" (76 x 26mm) with a nominal thickness of 1.25mm (varies between 1.2 – 1.3mm). Well size is 15–18mm diameter and 0.6 – 0.8mm deep. Available with one, two, or three cavities per slide. Pre-cleaned and ready for use. Autoclave safe.

NEW Chamber Cell Culture Slides

1, 2, 4, and 8 Chamber Cell Culture Slides, Sterile

• Grow cells directly on the slide without need for future transfer; ideal for growing and viewing cells under a microscope on standard 25mm x 75mm slide
• Integrated gasket prevents cross-contamination between chambers
• Inert hydrophobic green border printed on slide to define cell culture area
• Chamber holder features easy flip locks for assembly/disassembly; no separation tool required
• Packing trays can be used as incubation racks in CO₂ incubators
• Uniform hydrophilic surface ideal for consistent cell attachment
• Slides are labeled with numeric markings
• Adhesive free
• Sold in packs of 6/Tray with 2 Trays/Box
• Non-pyrogenic, clear, glass slide with polystyrene chambers
• 0.2-0.6ml working volumne
• 1.31cm² cell growth area
• RNase/DNase free

PELCO^® Gold Coated Microscope Slide

High quality glass, standard microscope slides coated with 50nm of gold with a 5nm chromium adhesion layer between the glass slide surface and the gold coating. Can be used for a wide range of nanotechnology, biotechnology and AFM applications. Also suitable as an opaque microscopy support. Both Cr and Au are evaporated on the glass slide using a vacuum evaporation system. The gold surface is not atomically flat, but has bumps in the nm range. The gold slides are individually packed in a slide mailer. The gold slides are autoclavable.

Specifications:
Glass slide: 75 x 25mm , 1mm thickness, soda lime glass
Chromium adhesion layer thickness: 5nm
Gold layer thickness: 50nm (+/- 5nm)
Gold purity: 99.999%