Slide Storage Boxes, Mailers
& Cabinets for Large Slides

PELCO^® MICROSLIDES Storage Boxes
for 3 x 2" (76.2 x 50.8mm / 1-1.2mm thickness) Slides

Exceptional slide storage containers providing maximum protection for your large microscope slides.

• Deep design for large 3 x 2" (76.2 x 50.8mm) slides
• Numbered index sheet in each lid with corresponding numbers in the base
• 100, 50 and 25 slide capacity boxes for 3 x 2" (76.2 x 50.8mm)
• Hinged lid with sliding lock latch
• Foam liner
• Stackable
• ABS-durable/impact resistant
• Unique sliding compression latch

Available in 3 sizes and 2 colors:

• 25 Slide Box: 3.64 x 4.12 x 2.38" (93 x 105 x 61mm)
• 50 Slide Box: 4.45 x 6.47 x 2.38" (113 x 165 x 61mm)
• 100 Slide Box: 8.19 x 6.9 x 2.38" (169 x 210 x 61mm)
• White and blue

Tall Slide Boxes

The Tall Slide Box made of sturdy ABS material is ideal for storage and transport of tall 3 x 2" (75 x 50mm) microscope slides. Available in a 100-slide and a 25-slide capacity box with grooved slots to prevent slide to slide contact. The base contains location numbers for convenient inventory, a cork liner in the 100-slide box and a foam liner in the 25-slide box. Lid interior contains a numbered index sheet for cataloging and identification. The deep design of the Tall Slide Box provides safe storage for the taller, non-standard microscope slides.

• Deep design for large 3 x 2" (75 x 50mm) slides
• Numbered index sheet in each lid with corresponding numbers in the base
• 100 slide capacity 3 x 2" (75 x 25mm) with hinged lid and cork liner
• Dimensions: 208 x 175 x 60mm (8.19 x 6.9 x 2.36")
• 25-slide capacity 3 x 2" (75 x 50mm) slides with compression fit lid and foam liner
• Dimensions: 82 x 104 x 66mm (3.25 x 4.025 x 2.75")

Durable, hardwood construction for 100 slides

38 x 75mm or 50 x 75mm (1-1/2 x 3" or 2 x 3").

Plastic Slide Holder Tray with Clear or Black Plastic Hinged Covers for 3 x 2" Slides

Slides pop-up when pressed on either side and are easily removed. Gray plastic with clear covers or white plastic with black covers. Both trays are not affected by acetone. Two hinged, clear plastic or black covers to hold down and protect slides from dirt and damage. Each holds up to 10, 3 x 2" slides.

May be used with the PELCO® MICROSLIDES Slide Folder Rack #2110-8.

Pop-Up 10-Slide Holder for 3 x 2" Slides

These sturdy Pop-Up Slide Holders hold ten 3 x 2" slides in recessed compartments numbered to correspond to the printed index on the cover. The compartments are recessed so the specimens cannot be touched when the covers are closed. Slides pop-up with a slight pressure at one end. Each holder is made of heavy card-stock 1.93mm (0.076") thick with a white finish. Hinged covers are attached with durable brown tape which is a unique color for the 3 x 2" slide folder.

Dimensions when closed: 20.3 x 34.3 x 0.96cm (8 x 13.5 x 0.38")

Economy Slide Mailers

Both slide mailers are made from sturdy 1.93mm (0.076") thick card-stock. #2119 holds one 75 x 50mm or 3 x 2" glass slide and Slide Mailer #2119-2 holds two large slides. Both have recessed slide compartments so coverglass is not touched by the inside of the cover when the mailer is closed.

Dimensions when closed (#2119): 76.2 x 95.3 x 5.8mm (3 x 3.75 x 0.23")
Dimensions when closed (#2119-2): 127 x 152.4 x 4.1mm (5 x 6 x 0.16 ")

BlocStor3 for Super Mega Cassettes and Slides

The BlocStor range of tissue block storage products is manufactured from recycled fiberboard and provides a cost-efficient archiving and storage solution. All boxes are designed for strength, rigidity, long term archiving of tissue blocks, and for maximum utilization of storage space.

Every BlocStor is supplied with a pre-printed archive label for clear identification and rapid retrieval. BlocStor boxes are available assembled or flat-packed for efficient use of your space.

Dimensions: 47 L x 17.2 W x 8.2cm H (16-1/4" L x 6-3/4" W x 3-1/4" H)

May be used with 21091-1 In/Out Tags and 21090-C Index Cards.

OmniStor Slide & Cassette Storage System

Provides affordable, sturdy slide storage for Super Mega slides and cassettes

The OmniStor Super Mega Cabinet (#21100) is supplied with one standard size drawer and seven Super Mega sized drawers, each capable of housing 30 Super Mega processing cassettes or approximately 260 Super Mega unmounted microscope slides.

The OmniStor 15-Drawer Slide Cabinet (#21100-1) has the same dimensions as the conventional 14-drawer slide cabinet but has been redesigned. The runner system is now at the bottom of the drawer, rather than the side, allowing a 15th drawer in the cabinet, increasing the storage capacity by 7%.

The black, heavy-duty OmniStor Base (#21100-3, #21100-4) is capable of supporting up to ten OmniStor cabinets. Available with and without wheels.
These cabinets incorporate an ‘easylock’ system which allows the secure location of stacked cabinets without the removal of cabinet drawers, screw plates and fixings. This means that users can simply slide and lock the cabinets on top of one another.

• Heavy-duty construction from corrosion protected steel
• Base supports up to ten cabinets
• Safe angled drawer front serves as a handle
• Dimensions: 484 L x 484 W x 126mm H (19 x 19 x 5")
• Compatible with 48 x 48cm (19 x 19") systems
• Average capacity: 160 blocks and 1,800 slides
• OmniStor T-cards included

CellNass SmartStor Slide & Cassette Storage System

The CellNass SmartStor Cabinet System is manufactured from corrosion-protected steel and has been specifically designed to maximize the number of slides and or blocks it can hold.

There is an optional Static Base (#21102-2) or Wheeled/lockable Heavy-duty Base Plinth (#21102-3). The SmartStor Lid (#21102-4) completes the set.

It is recommended that no more than five cabinets be stacked on top of each other at one time.

The CellNass SmartStor 8-Drawer Block Storage Cabinet (#21102-1) incorporates eight drawers, each able to accommodate a SmartStor Archive Box for standard size cassette blocks (#21102-5).