Small Desiccator Cabinets

Small Desiccator Cabinets: 12 x 12"

two sizes: 6" and 12" high WITH gas ports

Clear acrylic small desiccator which are fully transparent from all sides. Closed foam PVC gasket on door with spring loaded clamps to ensure an airtight seal. Door hinges to the front. Two perforated shelves are included. Desiccators have 1/8" NPT threaded holes to connect barb fittings. Units are stackable with non-slip feet. Wall thickness is 1/4".

Available in two sizes: 12 x 12 x 6" high; inside 11.5 x 11.5 x 5.5"; 12 x 12 x 12" high, inside 11.5 x 11.5 x 11.5"

Optional fittings for Small 12 x 12" Desiccator Cabinets
Amber, black and larger Desiccator Cabinets

Small Desiccator Cabinet: 9-1/4 x 8-7/8 x 6-5/8"

stackable, polystyrene, NO gas ports

Perfect for cramped locations, these desiccator cabinets may be safely stacked up to five high. The cabinet is completely transparent from any side. The door has a foam rubber gasket and two roller latches for an airtight seal. When opened, the door slides into an out-of-the-way compartment beneath the cabinet. A jar of silica gel is included with each cabinet.

Inside dimensions: 8-1/4 x 7 x 5" high (21 x 18 x 13cm)
Door opening: 7-1/2 x 4-3/8" high (19 x 11cm)
Overall dimensions: 9-1/4 x 8-7/8 x 6-5/8" high (23 x 22 x 17cm)

Small Desiccator Cabinet: 9-1/4 x 8-7/8 x 6-5/8"

stackable, polystyrene, WITH gas ports

Two gas ports added to the rear of the #2248 Desiccator Cabinet allow an atmosphere to be created that may be altered and maintained at any concentration desired. The gas ports, located at top and bottom, create a sweep of gas from the inlet through the outlet. The gas ports have leakproof 4mm stopcocks and the door has an excellent seal.

Useful for tissue culture work where a controlled carbon dioxide atmosphere is required or for flooding the chamber with nitrogen to eliminate oxygen.

Dimensions are the same as #2248, plus the 2-3/4" (7cm) extension of the stopcocks.

Optional fittings for Small 9-1/4 x 8-7/8 x 6-5/8" Desiccator Cabinet

Upright Desiccator Cabinet: 12-1/2 x 15-1/4 x 20"

with dial hygrometer

Molded of methyl methacrylate, this desiccator cabinet offers a clear view of contents. Shelf cleats allow for 15 levels of placement. Includes 3 sets of shelf rails and 3 clear shelves with small vent holes. The door has a full gasket, 2 metal hinges, 2 latches, and a handle.

Door opening: 10 x 17-7/8" high (25 x 45cm)
Inside depth: 13-1/4" (34cm)
Overall dimensions: 12-1/2 x 15-1/4 x 20" high (32 x 39 x 51cm) including desiccant tray

Horizontal Desiccator Cabinet: 14-3/4" x 19-5/8" x 13-3/4"

with dial hygrometer

This desiccator cabinet is similar to the upright model (above), but designed in a horizontal configuration. 8 levels of shelf cleats allow for placement of 2 sets of shelf rails and 2 clear shelves with small vent holes. The door has a full gasket and 2 metal hinges, 2 latches, and a handle.

Door frame inside dimensions: 17-7/8 x 10" high (45 x 25cm)
Inside depth: 13-1/4" (34cm)
Overall dimensions: 14-3/4 x 19-5/8 x 13-3/4" high (37 x 50 x 35cm) including desiccant tray

Horizontal Auto-Desiccator Cabinet

electrically operated, 115VAC

This auto-desiccator cabinet has the same dimensions as #2254 (above) and features an adsorption/regeneration cycle for the silica gel desiccant. No desiccant tray is needed. The gel is contained in the control section, where it absorbs moisture to maintain a low (30-40%) relative humidity. The adsorption period lasts 4-1/2 hours, indicated by a green pilot light. After this period, the silica gel is regenerated for a 1/2 hour period, indicated by a red pilot light. After regeneration of silica gel, the cycle repeats.