in 

Tools Overview
Tronex® Cutters Overview

NEW Tronex® Angulated Cutters

Cutting edges at an angle to the board




oval cutters Most precision hand cutting tools have cutting edges at a 15 to 20° angle so that there is clearance for the operator’s fingers on the handles. However, a much greater angle may be preferred when access to the object being cut is very limited or when the work area is very crowded. Tronex® offers angulated cutters at different angles and with different cutting edge sizes to meet a wide variety of needs.

Options below, available with short or long handles, pointed or regular tip:

  1. Large 50° Cutter
  2. Miniature 50° or 90° Cutters
  3. Small 50° or 70° Cutters

 

Tronex® tapered head wire cutter



NEW Large 50° Pointed Cutters

Large cutting edge with pointed tip. Short jaw for enhanced control.

Short Handle: 4.7" (119mm)

Long Ergonomic Handle: 5.7" (144mm)

Tronex® oval head cutter Tronex® oval head cutter Tronex® oval head cutter

Made in USA
Prod # Description Diameter of Soft Copper Wire Unit Price Order / Quote
5004 Large 50° Pointed Cutter, Short Handle, Flush 0.20 to 0.80 mm 0.008 to 0.031 in each $115.00
Qty:
7004-0 Large 50° Pointed Cutter, Long Handle, Flush 0.20 to 0.80 mm 0.008 to 0.031 in each 111.00
Qty:



NEW Large 50° Cutters

Largest cutting head. Robust. Excellent in cutting several leads in a single cut. Relieved for enhanced visibility.

Short Handle: 4.8" (123mm)

Long Ergonomic Handle: 5.8" (148mm)

Tronex® oval head cutter Tronex® oval head cutter Tronex® oval head cutter

Made in USA
Prod # Description Diameter of Soft Copper Wire Unit Price Order / Quote
5072-0 Large 50° Cutter, Short Handle, Flush 0.20 to 1.00 mm 0.008 to 0.039 in each $113.00
Qty:
7072 Large 50° Cutter, Long Handle, Flush 0.20 to 1.00 mm 0.008 to 0.039 in each 102.00
Qty:




NEW Miniature 90° Cutters

Long, very narrow jaw with miniature opposing cutting edges at end permit cutting in highly confined areas.

Short Handle: 4.9" (124mm)

Long Ergonomic Handle: 5.9" (149mm)

Tronex® oval head cutter Tronex® oval head cutter Tronex® oval head cutter

Made in USA
Prod # Description Diameter of Soft Copper Wire Unit Price Order / Quote
5074-0 Miniature 90° Cutter, Short Handle, Flush 0.20 to 0.65 mm 0.008 to 0.025 in each $122.00
Qty:
7074 Miniature 90° Cutter, Long Handle, Flush 0.20 to 0.65 mm 0.008 to 0.025 in each 130.00
Qty:




NEW Miniature 50° Cutters

A Surface Mount Technology ("SMT") cutter with a very small cutting head. Used for exceptionally fine cutting. Relieved for maximum accessibility.

Short Handle: 4.9" (124mm)

Long Ergonomic Handle: 5.9" (149mm)

Tronex® oval head cutter Tronex® oval head cutter Tronex® oval head cutter

Made in USA
Prod # Description Diameter of Soft Copper Wire Unit Price Order / Quote
5075-0 Miniature 50° Cutter, Short Handle, Flush 0.10 to 0.65 mm 0.004 to 0.025 in each $122.00
Qty:
7075 Miniature 50° Cutter, Long Handle, Flush 0.10 to 0.65 mm 0.004 to 0.025 in each 130.00
Qty:




NEW Small 50° Pointed Cutters

New angulated cutter with a very pointed tip which allows for maximum accessibility into confined areas.

Short Handle: 4.9" (124mm)

Long Ergonomic Handle: 5.9" (149mm)

Tronex® oval head cutter Tronex® oval head cutter Tronex® oval head cutter

Made in USA
Prod # Description Diameter of Soft Copper Wire Unit Price Order / Quote
5080-0 Small 50° Pointed Cutter, Short Handle, Flush 0.10 to 0.80 mm 0.008 to 0.030 in each $113.00
Qty:
7080 Small 50° Pointed Cutter, Long Handle, Flush 0.10 to 0.80 mm 0.008 to 0.030 in each 114.00
Qty:




NEW Small 50° Cutters

Most popular angulated cutter. Small cutting head with relief for excellent visibility. Durability combined with fine cutting.

Short Handle: 4.9" (124mm)

Long Ergonomic Handle: 5.9" (149mm)

Tronex® oval head cutter Tronex® oval head cutter Tronex® oval head cutter

Made in USA
Prod # Description Diameter of Soft Copper Wire Unit Price Order / Quote
5082-0 Small 50° Cutter, Short Handle, Flush 0.10 to 0.80 mm 0.008 to 0.030 in each $113.00
Qty:
7082 Small 50° Cutter, Long Handle, Flush 0.10 to 0.80 mm 0.008 to 0.030 in each 114.00
Qty:




NEW Small 70° Pointed Cutters

A Surface Mount Technology ("SMT") cutter. Steep 70° angle with a very fine cutting head allows special access.

Short Handle: 4.9" (124mm)

Long Ergonomic Handle: 5.9" (149mm)

Tronex® oval head cutter Tronex® oval head cutter Tronex® oval head cutter

Made in USA
Prod # Description Diameter of Soft Copper Wire Unit Price Order / Quote
5083 Small 70° Pointed Cutter, Short Handle, Flush 0.10 to 0.65 mm 0.008 to 0.025 in each $36.00
Qty:
7083 Small 70° Pointed Cutter, Long Handle, Flush 0.20 to 0.80 mm 0.008 to 0.025 in each 123.00
Qty: