ECS Series Electronic Calipers

Include NIST traceable certificate

certified, digital, carbon fiber caliper

certified, digital, carbon fiber caliper certified, digital, carbon fiber caliper

Precise and easy to use digital calipers with great features from Swiss Precision Instruments. Made from precise ground hardened stainless steel with a large LCD screen. Available with 6", 8" and 12" range. Accurate to 0.0010" (0.025mm) for the 6" model and 0.0016" (0.038mm) for the 8" and 12" models. Absolute or incremental switching, zero-set anywhere within range, inch-metric conversion and auto power on/off. A NIST traceable certificate is included with each of these calipers w/o additional costs. Complete with CR2032 battery and storage case.

 6" Model8" Model 12" Model
Product number 54497-61 54497-81 54497-121
Measuring Range6" / 150mm8" / 200mm12" / 300mm
Jaw Length 1.57" / 40mm 1.97" / 50mm 2.36" / 60mm
Accuracy ±0.0010" / 0.025mm ±0.0015" / 0.038mm ±0.0015" / 0.038mm
Display Resolution0.0005" / 0.01mm0.0005" / 0.01mm0.0005" / 0.01mm
MaterialStainless SteelStainless SteelStainless Steel
Battery Type CR2032CR2032CR2032
Traceable CertificateNIST, includedNIST, includedNIST, included
Depth MeasurementYesYesYes
Data Output No No No

Prod # Description Unit Price Order / Quote
54497-61 ECS Digital Electronic Calipers, 6" (150mm), NIST traceable each $172.00
54497-81 ECS Digital Electronic Calipers, 8" (150mm), NIST traceable each 216.00
54497-121 ECS Digital Electronic Calipers, 12" (150mm), NIST traceable each 346.80

Digital, Carbon Fiber Caliper, Certified

certified, digital, carbon fiber caliper

Designed for the lab
Switch from inches to millimeters at the touch of a button. Great for use in measuring scratch or damage sensitive materials. Will not corrode when used on tissue or other wet materials. This caliper will measure up to 6" (152mm).
The graduated scale on the caliper body is for approximate reference only. The exact measurement (accurate to ±0.1mm/0.01") is shown on the LCD display.

Zeroes at any point
Zero button instantly sets unit to zero when jaws are at any position. This permits setting a Floating Zero™ or reference point to read “greater than or less than results with a minus sign displayed” without calculations. Ergonomic design, precision calipers are ideal for measuring outside or inside diameter. Easy to read, large digital display is 1/3" (8.5mm) high.

Traceable to NIST for accuracy
No lubrication is ever required on the ultra-smooth slide bar. Runs on the supplied battery for 10,000 hours. Made of strong composite carbon fiber. To assure accuracy an individually serial-numbered Certificate is provided from an ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Example of Calibration Certificate (PDF/381KB)

Prod # Description Unit Price Order / Quote
54491 Digital Carbon Fiber Calipers with certificate, 6" (152mm) each $52.00

Digital Micrometer, Metric

Clear, easy-to-read numbers on a digital counter; every fifth millimeter (and thousandth) is numbered on the thimble. Including wrench and fitted case. NIST traceable certificate is available at time of purchase against additional cost.

Metric - 0 to 25mm, 0.001mm graduation

Prod # Description Unit Price Order / Quote
54492 Digital Micrometer, Metric Scale each $294.60
54492-2 Certificate for Digital Micrometer # 54492 (supplied with purchase only) each 72.35

Vernier Caliper

Vernier Caliper

High precision caliper for both inch and metric measurements. Graduations 0.05mm and 0.001 inch. Hardened, tempered stainless steel, satin chrome finish. Jaws designed for inside, outside and thread measurements. Thumb lock slide. Depth of jaws: 1.6" (40.6mm). Range: 6" (152mm).

Prod # Description Unit Price Order / Quote
54488 Vernier Caliper, Metric & Inch, 6" (152mm) each $49.50