in 

Maintenance The Ted Pella, Inc. website will be unavailable on 9/18/2021 from 11am to 3pm GMT
(8pm to 12am PST) for maintenance. Our apologies for any inconvenience.

PELCO BioWave® Pro+ Microwave Tissue Processor
Electron Microscopy Tissue Processing Applicaiton Kit

Microwave Processing in a Clinical Lab
Daily Routine - Microwave Protocol

Microwave Procedure by RONALD L. AUSTIN
Dept. of Pathology, LSUHSC, Shreveport, LA.

  1. The tissue is placed in clear screw cap glass vials (Fig. 1 - 5ml or so) with 0.1M NaCacodylate buffer. This is followed by a couple of brief rinses. Tissues are left in buffer to rinse on a rotator for the length of time needed for the resin to mix (no less than two hours).
  2. Mixing the resin is done under vacuum; humidity can be a problem in southern labs even with AC.

This would be a good time for lunch

  1. By 1pm the resin has mixed will enough to facilitate good infiltration.
  2. Remove the buffer and post fix (still in the glass screw cap vials) with 1% OsO4 in 0.1M NaCacodylate buffer. Microwave the OsO4 in the glass screw cap (caps on) to prevent osmium vapors from contaminating the microwave. Don't worry nothing will blow up. Microwave for 3 minutes at 200W. Use only enough OsO4 to cover the tissue.
  3. Tissues in the capped vials are processed on the ColdSpot as shown in Figure 1.

    EM Protocol for Microwave Processing 1
  4. A brief rinse in 30% acetone and transfer tissue to the PREP-EZE specimen holder (Figure 2).


    EM Protocol for Microwave Processing 2
  5. 50% acetone for 3 minute @ 200W
  6. 70% acetone for 3 minute @ 200W
  7. 95% acetone for 3 minute @ 200W
  8. 2 x 100% acetone for 5 minutes @ 200W
  9. 1:1 100% acetone to 100% resin for 10 minute @ 250 watts - no vacuum
  10. 1:1 100% acetone to 100% resin under vacuum (20" Hg) for 5 minutes @ 250W
  11. 1:2 100% acetone to 100% resin under vacuum (20" Hg) for 5 minutes @ 250W
  12. 2 x 100% resin under vacuum (20" Hg) for 5 minutes @ 250W

We place the tissue in flat embedding molds (best orientation in flat molds) and leave in a 70°C oven overnight for polymerization. The resin needs to be in the oven for 14-16 or longer hours for best sectioning results.

You can stain your sections in the microwave if you are using lead citrate (LC) and uranyl acetate (UA), 3 minutes in uranium and 1 minute in lead. Set the wattage at 250.

Materials needed for UA & LC staining in the microwave

Method: (all staining done on the ColdSpot)

  1. Place grids section side down on a filtered 35µl drop of UA in the Microwell Staining Mold
  2. Microwave the UA for 3-5 minutes @ 250W.
  3. Rinse in 0.22µ millipored water ~20 dips in each of two 4 dram shell vials. Blot grid on filter paper.
  4. Stain with LC for 1 minute @ 250W in covered petri dish containing NaOH pellets. Rinse using 4 different vials.
  5. The first vial should have 5-6 drops of 1N NaOH solution, carbonate-free, ~20 dips.
  6. The next 3 vials contain 0.22µ millipored water, ~20 dips each.
  7. Blot grids on filter paper.

Note:
Glutaraldehyde fixation is generally done at the site of the biopsy and the time it takes to get to your lab may be as long as 24-48 hours in glutaraldehyde, however, biopsies done locally may arrive in saline and need to be fixed ASAP. Check the contents. If saline is used place glutaraldehyde in the biopsy container and use the microwave technique to salvage what's left of the tissue.

Microscope: Hitachi 7950 III
Camera: AMT - Hamamatsu Digital Camera ORCA-HR 2k x 2k

Fingerprint Structures

Fingerprint Structures: Figure 1

Fingerprints substructures, first described by Grishman, (142) consists of curved arrays of from two to six parallel dark bands of various lengths alternating with light bands , producing a configuration that mimics a fingerprint. The diameter of the bands varies from 10 to 15nm. These bands are usually curved but some may be straight and seemingly tubular. The composition of these fingerprints is believed to be a mix of IgA, IgG, IgM, found in the subepithelial layer of the loops. Can be found lupus nephritis WHO class III – V. A small percentage of lupus nephritis patient have fingerprints.

Tubuloreticular Inclusions fig. 2

Tubuloreticular Inclusions Fig. 3

Tubuloreticular Inclusions (TRIs) Figures 2 & 3

A common and characteristic ultrastructural finding in lupus nephritis. These structures are most often identified in glomerular endothelial cells, in which they may reach large size and commonly number several per glomerulus. They are also readily detected in the endothelium of interstitial capillaries and arteries of the kidney. They are always located in dilated cisternae of endoplasmic reticulum. The precise cellular function of these structures remain unknown.