in 

Materials Science Overview
Electronics & Semiconductors Overview
Scribing & Cleaving Overview

Now Manufactured by & Available from Ted Pella, Inc.

PELCO® LatticeAx® 120

Indent and Cleaving System

The PELCO® LatticeAx® 120 base system (formerly from LatticeGear™) comprises a scribeless cleaving instrument with fine, adjustable control of the indentation action on the sample surface, followed by a precision controlled 3-point cleaving step for the production of a high-quality cleaved sample cross-section.

It includes a LatticeAx® vacuum stage to secure the sample during the indentation step; a precision, low-profile linear stage to accurately set the indentation position; a pre-installed diamond indenter; and a small vacuum pump with its connection hose.

It is a compact, versatile and powerful cleaving tool for downsizing and cross sectioning a wide range of substrates including Silicon, GaAs, InP, Sapphire, and Glass. With the PELCO® LatticeAx®, you can cleave your samples as they are, without additional preparation or strict rules on the size, shape, thickness, edge quality and material type.

Prod # Description Unit Price Order / Quote
54320 PELCO® LatticeAx® 120 Sample Cleaving System each P.O.R.
Qty:
54320-220 PELCO® LatticeAx® 120 Sample Cleaving System, 220V each P.O.R.
Qty:




   
Small Sample Hold-downs

The PELCO® Small Sample Cleaver™

Using simple mechanics, the PELCO® Small Sample Cleaver™ (formerly from LatticeGear™) uses a novel sample holder and a cleaving platform to safely cleave samples into chips as small as 2 x 2mm. The novel sample holder allows samples from 4-10mm to be held during indenting and cleaving. No more handling samples directly with fingers – gloved hands are ok. The holder has no screws, springs or pins. Accepts samples from 3-15mm in width and 200-900µm in thickness.

Features

  • Accepts samples from 3-15mm in width and 200-900µm in thickness
  • Four magnetic hold-downs for various sample thicknesses
  • Securely transfer the sample to the PELCO® LatticeAx® for indent, then back to the Small Sample Cleaver™ for cleaving
  • Two cleaving pins for cleaving a variety of sample types
  • Gauge sets the sample for an 0.5mm indent versus the standard 1mm indent on the PELCO® LatticeAx®

Prod # Description Unit Price Order / Quote
54367 PELCO® Small Sample Cleaver™ Cleaving System each $1495.00
Qty:




Large Sample Platform

Large Sample Platform for PELCO® LatticeAx®

The Large Sample Platform is a PELCO® LatticeAx® option that adds support for wafers and samples up to 300mm. It consists of a support system and an indenter extension. The support system includes five underpins made from a Delrin® composite that do not damage the backside of the sample. The indenter extension facilitates the fine positioning control of the indenter when large samples are mounted. The Large Sample Platform fits on all models of PELCO® LatticeAx® systems and is easy to install with a single set screw.

Prod # Description Unit Price Order / Quote
54305 Large Sample Platform for all PELCO® LatticeAx® Models each $795.00
Qty:




Replacement Indenters
for PELCO® LatticeAx®

 

Prod # Description Unit Price Order / Quote
54301 Replacement Indenter for PELCO® LatticeAx®, Standard each $655.00
Qty:
54302 Replacement Indenter for PELCO® LatticeAx®, Short each 655.00
Qty:
54303 Replacement Indenter for PELCO® LatticeAx®, High Angle each 705.00
Qty: