in 

Materials Science Overview
Electronics & Semiconductors Overview
Scribing & Cleaving Overview

Now Manufactured by & Available from Ted Pella, Inc.

PELCO® LatticeAx® 420

The Ultimate High Accuracy Indent and Cleaving System



The PELCO® LatticeAx® 420 (formerly from LatticeGear™) provides the Highest level of Accuracy and Performance in the PELCO® LatticeAx® Indent and Cleaving System model lineup. The PELCO® LatticeAx® 420 delivers our highest cleaving accuracy of 10μm in less than 5 minutes making it ideal for any lab that values speed and high accuracy while at the same time needing to accommodate a variety of sample sizes, thicknesses and material types. The patented PELCO® LatticeAx® base is integrated with a complete vision package that includes a monocular microscope with 4μm optical resolution, color CCD camera and real-time image acquisition and display software, and an X-Y stage. This dedicated cleaving workstation is designed so any trained user can easily survey, align, micro-indent, cleave, and inspect processed samples.

Features

  • Ultra high accuracy positioning of target (±10µm)
  • Focus mount with coarse and fine focus control
  • Monocular, parfocal, zoom lens (0.58-7x mag) with color CCD camera
    (computer and monitor not included)
  • Indent position control with 5µm step size
  • Polished tip diamond indenter 5 minute process sample setup to cleave
  • Simple to use, ergonomic design and small footprint
  • Cleaves a wide range of materials and sample sizes
  • Clock dial for indent depth calibration
     
Diamond Indenter Cleaved Semiconductor Delidded MEMS Device
     


Ordering Information

Prod # Description Unit Price Order / Quote
54300 PELCO® LatticeAx® 420 Sample Cleaving System each P.O.R.
Qty:
54300-220 PELCO® LatticeAx® 420 Sample Cleaving System, 220V each P.O.R.
Qty:




   
Small Sample Hold-downs

The PELCO® Small Sample Cleaver™

Using simple mechanics, the PELCO® Small Sample Cleaver™ (formerly from LatticeGear™) uses a novel sample holder and a cleaving platform to safely cleave samples into chips as small as 2 x 2mm. The novel sample holder allows samples from 4-10mm to be held during indenting and cleaving. No more handling samples directly with fingers – gloved hands are ok. The holder has no screws, springs or pins. Accepts samples from 3-15mm in width and 200-900µm in thickness.

Features

  • Accepts samples from 3-15mm in width and 200-900µm in thickness
  • Four magnetic hold-downs for various sample thicknesses
  • Securely transfer the sample to the PELCO® LatticeAx® for indent, then back to the Small Sample Cleaver™ for cleaving
  • Two cleaving pins for cleaving a variety of sample types
  • Gauge sets the sample for an 0.5mm indent versus the standard 1mm indent on the PELCO® LatticeAx®

Prod # Description Unit Price Order / Quote
54367 PELCO® Small Sample Cleaver™ Cleaving System each $1495.00
Qty:




Large Sample Platform

Large Sample Platform for PELCO® LatticeAx®

The Large Sample Platform is a PELCO® LatticeAx® option that adds support for wafers and samples up to 300mm. It consists of a support system and an indenter extension. The support system includes five underpins made from a Delrin® composite that do not damage the backside of the sample. The indenter extension facilitates the fine positioning control of the indenter when large samples are mounted. The Large Sample Platform fits on all models of PELCO® LatticeAx® systems and is easy to install with a single set screw.

Prod # Description Unit Price Order / Quote
54305 Large Sample Platform for all PELCO® LatticeAx® Models each $795.00
Qty:




Replacement Indenters
for PELCO® LatticeAx®

 

Prod # Description Unit Price Order / Quote
54301 Replacement Indenter for PELCO® LatticeAx®, Standard each $655.00
Qty:
54302 Replacement Indenter for PELCO®LatticeAx®, Short each 655.00
Qty:
54303 Replacement Indenter for PELCO® LatticeAx®, High Angle each 705.00
Qty: