in 

go to SEM Supplies and Accessories Overview

NEW PELCO® EBSD Pre-tilt
Specimen Holders & Mounts

This extensive selection of multi-functional EBSD specimen holders can be used in SEMs, FESEMs and FIB systems with a standard pin or M4 stage mount. With the pre-tilted holders, there is no need to tilt the specimen stage. This avoids drift and enables quick setup for EBSD analysis. The 70° pre-tilt assemblies incude petrographic slide holders and metallographic sample holders. Rotate the external holder via the adjustable set screw for additional sample geometries or t-EBSD analysis. Some of the larger holders require a larger specimen chamber and a larger stage. Depending on the available working distance, z-movement, and maximum specimen height provided by the specimen stage in the SEM, stub extensions and stage adapters may be added to obtain the optimized working distance.

EBSD holders with M4 threaded hole can be attached to an SEM stage (Hitachi, JEOL, Amray, etc.) by using interchangeble holders and adapters:

modular stage adapter assembled
Modular Stage Adapters 		stub adapters
Stub Extensions		 Cylinder Adapter for JEOL Holders
Cylinder Adapters

EBSD holders with M4 threaded hole can be used as a pin mount holder by using an M4 to pin mount adapter:

low pin stub adapter to m4short pin stub adapter to m4long pin stub adapter to m4
M4 Thread
to Pin Mount		 Pin Mount Adapter to M4 Thread for Hitachi SEM MountsHitachi M4 to Zeiss pin stub
M4 Adapter
to Pin Stub Mount



Made in USA

EBSD Pre-Tilt Holder for Thin Specimens EBSD Pre-Tilt Holder for Thin Specimens
 EBSD Pre-Tilt Holder for Thin Specimens

NEW PELCO® EBSD Pre-Tilt Holder for Thin Specimens

70° pre-tilt EBSD holder has a removable pin to allow M4 mounting. Made of machined aluminum with stainless steel Allen set screw. Holder is fully adjustable, rotatable through 360°.

Thin specimen split mount with special wide opening up to 6.4mm (1/4"), height of head is 7.4mm (0.29"). Stainless steel.
pin mount M4 mount
(pin removed)
Prod # Description Unit Price Order / Quote
15352 PELCO® EBSD Thin Specimen Split Mount, Pre-tilt 70°, Ø12.7mm (1/2") each $79.00
Qty:



EBSD Pre-Tilt Holder for Thin Specimens EBSD Pre-Tilt Holder for Thin Specimens EBSD Pre-Tilt Holder for Thin Specimens

NEW PELCO® EBSD Pre-Tilt Holder for Thin Specimens with SEMClipTM

70° pre-tilt EBSD holder has a removable pin to allow M4 mounting. Made of machined aluminum with stainless steel Allen set screw. Holder is fully adjustable, rotatable through 360°.

PELCO SEMClipTM Ø12.5mm (1/2"), Single Clip mount. An easy, quick and clean way to mount any type of thin specimen. Allen wrench included.
pin mount M4 mount
(pin removed)
Prod # Description Unit Price Order / Quote
15353 PELCO® EBSD Thin Specimen Mount, Pre-tilt 70° with PELCO SemClipTM, Ø12.5mm (1/2"), Single Clip each $79.00
Qty:



EBSD Pre-Tilt Holder for Thin Specimens EBSD Pre-Tilt Holder for FIB Grids EBSD Pre-Tilt Holder for FIB Grids

NEW PELCO® EBSD Pre-Tilt Holder for FIB Grids

FIB grid holder mounted on a standard 70° pre-tilt holder. Holds up to 2 FIB grids of the same thickness. Holder is fully adjustable, rotatable through 360°.

Has a removable pin to allow M4 mounting. Made of machined aluminum with stainless steel Allen set screw. Allen wrench included.
pin mount M4 mount
(pin removed)
Prod # Description Unit Price Order / Quote
15354 PELCO® EBSD Holder for FIB Grids, Pre-tilt 70º, 3.2mm (1/8") Pin each $89.00
Qty:



EBSD Pre-Tilt Holder for Thin Specimens EBSD Pre-Tilt Holder with Small Vise EBSD Pre-Tilt Holder with Small Vise

NEW PELCO® EBSD Pre-Tilt Holder with Small Set Screw Vise

70º pre-tilt holder with removable 3.2mm (1/8") pin to allow M4 mounting. Machined aluminum with stainless steel Allen set screw. Holder is fully adjustable, rotatable through 360°.

Single stainless steel set screw into an open slot that is 4mm (0.157") wide x 5mm (0.197") deep. Ø12.7mm (1/2") x 17.7mm (0.70") high. Allen wrench included.
pin mount M4 mount
(pin removed)
Prod # Description Unit Price Order / Quote
15355 PELCO® EBSD Holder with Small Set Screw Vise, Pre-tilt, Pre-tilt 70º, 3.2mm (1/8") Pin each $79.00
Qty:




EBSD Pre-Tilt Holder for Thin Specimens EBSD Pre-Tilt Holder for Slides EBSD Pre-Tilt Holder for Slides

NEW PELCO® EBSD Pre-Tilt Glass Slide Holder on Pin Stub

70° pre-tilt EBSD holder with variable size geologic/petrographic thin section holder. Holds either standard petrographic slides of up to 48 x 28mm or slides from 40 x 20mm to 75 x 25mm. Two clips are provided for secure holding. Tweezers insert enables easy loading. Allen wrench included. Holder is fully adjustable, rotatable through 360°.

Screws used are M3 x 3mm set, stainless steel, clip screw is M2 x 3mm pan head, brass, 3.2mm (1/8”) pin.
front back
Prod # Description Unit Price Order / Quote
15336 PELCO® EBSD Pre-Tilt Glass Slide Holder on Pin Stub each $295.00
Qty:



EBSD Pre-Tilt Holder for Thin Specimens EBSD Pre-Tilt Holder for Slides EBSD Pre-Tilt Holder for Slides

NEW PELCO® EBSD Pre-Tilt Glass Slide Holder, M4

70° pre-tilt EBSD holder with variable size geologic/petrographic thin section holder. Holds either standard petrographic slides of up to 48 x 28mm or slides from 40 x 20mm to 75 x 25mm. Two clips are provided for secure holding. Tweezers insert enables easy loading. Allen wrench included. Fully adjustable, rotatable through 360°.

Screws used are M3 x 3mm set, stainless steel, M4 x 8mm stainless steel socket head cap screw, clip screw is M2 x 3mm pan head, brass, M4 threaded hole.
front back
Prod # Description Unit Price Order / Quote
15336-4 PELCO® EBSD Pre-Tilt Glass Slide Holder, M4 each $311.50
Qty:



low profile 70 degree sem mount dimensions Low Profile
low profile 70 degree sem mount

SEM Pin Stub Specimen Mounts for EBSD

Low profile 70º EBSD SEM Mounts Ø12.7mm for Cambridge, Leica, ZEISS, LEO, FEI, Philips, CamScan, Tescan, ETEC, and Amray SEM's.
Aluminum, grooved edge, 9.5mm pin height
Prod # Description Unit Price Order / Quote
16109 Low Profile 70º Mount, Ø12.7mm each $4.90
Qty:



EBSD Specimen Mount, 70° EBSD Specimen Mount, 70°

Hitachi Angled Mounts

70° EBSD Aluminum Specimen Mounts, Ø15 x 12mm, M4
Prod # Description Unit Qty Price Order / Quote
70°, Aluminum
16333 70°, EBSD Specimen Mount, Ø15 x 12mm x M4 each 1-9 $5.10
Qty:
10+ 4.80



sem 70 degree cylinder specimen mount dimensions sem 70 degree cylinder specimen mount

JEOL and ISI/ABT/Topcon Mounts

70° EBSD Aluminum Specimen Mounts, Ø15 x 10mm
Prod # Description Unit Price Order / Quote
JEOL and ISI/ABT/Topcon, 70°, Aluminum
16370 Specimen Mount, 70° for EBSD, Ø15 x 10mm pkg/10 $39.50
Qty:
pkg/50 180.00
Qty:



70° EBSD Pre-Tilt Holder for Hitachi

70° EBSD Pre-Tilt Holder for Hitachi Mounts and Pin Stubs

Accepts 15mm Hitachi mounts on M4 thread. Pin can be rotated and fixed for optimum position. When the pin with M4 thread is removed, this holder also accepts a standard 12.7mm (1/2") pin stub with 3.2mm (1/8") pin. This holder is made of machined aluminum with stainless steel Allen set screw. Allen wrench included.

Screw used is M3 x 3mm set screw, stainless steel.
Prod # Description Unit Price Order / Quote
15428-70 70° Pre-Tilt Holder, M4 each $52.00
Qty:




- 15329-70

70° EBSD Pre-Tilt Pin Stub Holders

70° EBSD Pre-Tilt Holder accepts standard 12.7mm (1/2") pin stubs with 3.2mm (1/8") pin. Grooved, made of machined aluminum with stainless steel Allen set screw. Allen wrench included.

Screw used is M3 x 3mm, Set, stainless steel set screw, stainless steel
Prod # Description Unit Price Order / Quote
15329-70 70° EBSD Pre-Tilt Pin Stub Holder, 3.2mm (1/8") Pin each $49.00
Qty:



EBSD Holder for 1"/25mm Mounts

EBSD Holder for 25mm (1") Mounts

70° pre-tilt EBSD holder for standard 25mm (1") embedding mounts. With this mount there is no need to tilt the SEM specimen stage which avoids drift and enables quick setup for EBSD analysis. Standard 3.2mm (1/8") pin. This holder is made of vacuum grade aluminum with stainless steel Allen set screws. Allen wrench included.

Screws used are M3 x 6mm socket head cap, stainless steel and M3 x 12mm socket head cap, stainless steel and M3 x 3mm, Set, stainless steel
Prod # Description Unit Price Order / Quote
15327 EBSD Holder for 1"/25mm Mounts, 70° Pre-Tilt, Pin each $140.00
Qty:



EBSD Holder for 1-1/4"/32mm Mounts

EBSD Holder for 32mm (1-1/4") Mounts

70° pre-tilt EBSD holder for standard 32mm (1-1/4") embedding mounts. With this mount there is no need to tilt the SEM specimen stage which avoids drift and enables quick setup for EBSD analysis. Standard 3.2mm (1/8") pin. This holder is made of vacuum grade aluminum with stainless steel Allen set screws. Allen wrench included.

Screws used are M3 x 6mm socket head cap, SS and M3 x 12mm socket head cap, stainless steel and M3 x 3mm, Set, stainless steel
Prod # Description Unit Price Order / Quote
15328 EBSD Holder for 1-1/4"/32mm mounts, 70° Pre-Tilt, Pin each $151.00
Qty:



EBSD Holder for 1"/25mm Mounts

EBSD Holder for 25mm (1") Mounts

70° pre-tilt EBSD holder for standard 25mm (1") embedding mounts. With this mount there is no need to tilt the SEM specimen stage which avoids drift and enables quick setup for EBSD analysis. M4 compatible thread in base. This holder is made of vacuum grade aluminum with stainless steel Allen set screws. Allen wrench included.

Screws used are M3 x 3mm set screw, stainless steel and M4 x 8mm socket head cap screw, stainless steel.
Prod # Description Unit Price Order / Quote
15327-4 EBSD Holder for 25mm (1") mounts, 70° Pre-Tilt, M4 each $140.50
Qty:



EBSD Holder for 1-1/4"/32mm Mounts

EBSD Holder for 32mm (1-1/4") Mounts

70° pre-tilt EBSD holder for standard 32mm (1-1/4") embedding mounts. With this mount there is no need to tilt the SEM specimen stage which avoids drift and enables quick setup for EBSD analysis. M4 compatible thread in base. This holder is made of vacuum grade aluminum with stainless steel Allen set screws. Allen wrench included.

Screws used are M3 x 3mm set screw, stainless steel and M4 x 8mm socket head cap screw, stainless steel.
Prod # Description Unit Price Order / Quote
15328-4 EBSD Holder for 32mm (1-1/4") mounts, 70° Pre-Tilt, M4 each $152.50
Qty: