Stainless steel or black anodized aluminum tray provides an excellent mounting device for holding the tissue in an appropriate buffer. This is used instead of the standard Vibratome^® mounting block. The tray allows you to use less buffer while keeping contamination to a minimum. The tray can be surrounded by ice, keeping the buffer cold without disturbing the sections. Easily removable for cleaning and can be autoclaved.

The Vibratome^® Specimen Tray includes a V-block Adapter (No. 101-26), required for installation.
Inside dimensions: 76mm L x 55mm W x 9.5mm D (3 x 2-3/16 x 9-3/8”).

Prod #	Description	Unit	Price	Order / Quote
101-40	Vibratome® Specimen Tray & Vise Adapter, stainless steel	each	$97.25	Qty:
101-42	Vibratome® Black Specimen Tray & Vise Adapter, aluminum	each	49.50	Qty:

Specimen Pin Mount for Vibratome^®

Prod #	Description	Unit	Price	Order / Quote
101-31	Vibratome® Specimen Pin Mount with roughened top surface	pkg/5	$4.95	Qty:

Specimen Retriever

This is a perfect tool for retrieving free floating sections from the microtome bath.

Prod #	Description	Unit	Price	Order / Quote
101-33	Specimen Retrievers	pkg/5	$65.00	Qty:

Consumables for Vibratome^®

Blades: Injector Style - Stainless Steel - PTFE-treated
Loctite Tissue Adhesive
Useful for Vibratome^® sectioning and other sectioning applications. Single edge, 20 per dispenser.

Feather^® Blades

double edge, carbon steel blade

Sharp edges; may be broken in half lengthwise (protect fingers and use eye protection). This is the preferred razor blade for use with the Vibratome^® and other vibrating microtomes.
• Length: 42.8mm (1.685");
• Cutting Edge Length: 36mm (1.42")
• Width: 22mm (.865")
• Thickness: .127mm (.005")

Prod #	Description	Unit	Price	Order / Quote
121-9	Feather® Double Edge Carbon Steel blade	pkg/10	$8.45	Qty:

Prod #	Description	Unit	Price	Order / Quote
121-6	Double Edge Stainless Steel Razor Blades, box/250	each	$42.90	Qty:

Other Blades for Vibratomes® and Microslicers
go to Sapphire Blades

PELCO® Pro CA44 Tissue Adhesive

PELCO® Pro CA44 is an instant tissue adhesive based on cyanoacrylate. Developed to glue tissue on specimen holders used in vibrating microtomes, such Microslicer and Vibratome. Although the tissue adhesive is instable in boiling water, it is recommended to use #19920 PELCO® Pro Cyanoacrylate Debonder (below) to remove or clean cured cyanoacrylate. Supplied in 20ml bottle with dispenser tip, closed with ptfe coated steel pin for optimum seal.
Compatible to Loctite 404 tissue adhesive.
I - MSDS

Prod #	Description	Unit	Price	Order / Quote
10033	PELCO® Pro CA44 Instant Tissue Adhesive, 20ml	each	$9.60	Qty:

The shelf life of cyanoacrylate glues (and epoxies) can be extended by storing them at lower temperatures; -20°C. At lower temperatures, the adhesive becomes very viscous and the speed of chemical reactions is practically reduced to zero. It will keep the adhesive stable for years. Before use, let the adhesive thaw with the container sealed to avoid condensation into the adhesive.

PELCO® Pro Cyanoacrylate Debonder

The PELCO® Pro Cyanoacrylate Debonder destabilizes and debonds cured cyanoacrylates. Useful for releasing specimens from holders, cleaning cyanoacrylates from surfaces and removing cured cyanoacylates from fingers. Works on all brands of cyanoacrylate glue (Loctite, Henkel, Permabond, 3M™, PELCO®, Aron Alpha, etc.). The debonder is also a solvent, please check before using on plastic surfaces / samples and avoid repeated skin contact. Supplied in 20ml bottle with dispenser tip.
F, Cg, I, T - MSDS

Prod #	Description	Unit	Price	Order / Quote
19920	PELCO® Pro Cyanoacrylate Debonder, 20ml	each	$5.69	Qty: