| Home Page | Abbreviated Contents | Customer Login | Quick Order / View Order | |
|---|---|---|---|---|
| Contact Us | Search | Indexes | Finish Order | |
|
NW/KF Hose Flanges with Wire Reinforced PVC Vacuum HoseLow cost alternative for flexible stainless vacuum hoses. Wire reinforced PVC tubing with 304 stainless steel NW/KF flanges on each end and secured with stainless steel hose clamps. |
|||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||
![]() |
NW/KF Hose Adapter, 304 Stainless Steel![]() Machined from solid bar, no welds |
|||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
|
Wire Reinforced Thick Wall PVC Vacuum HoseUse with hose adapters and hose clamps to make custom vacuum hoses. Can be ordered per ft. with minimum length of 3 ft. and maximum length of 50 ft. |
|||||||||||||||||||||||||||||||||||||||||||||
|
Permits full vacuum capabilities (29.9 in./Hg.) for all sizes without hose collapse.
Constructed of corrosion-resistant PVC, can be used to transport various chemicals
in areas with tight turns and sharp bends. Its bend radius is approximately four
times the I.D.
Can be used at Temperatures from +10° to +140°F (-12° to +60°C)
|
||||||||||||||||||||||||||||||||||||||||||||||
![]() 92400-25 |
|
|||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
|
Hose Clamps for Vacuum Hose, Stainless SteelThese clamps are compatible with the wire reinforced, thick wall PVC vacuum hose we offer. They are quick, economical and reusable. Bands are 0.023" thick x 5/16" wide (1/4") and 1/2" wide (all other sizes) with temperature range of 50° to +250° F. Not recommended for use with silicone hose. Clamps tighten with a wrench, slotted screwdriver or hex nutdriver. Made from type 301 stainless steel with type 410 stainless steel screw. |
||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||
|
1/2" and 3/4" ID Vacuum HoseHeavy wall, versatile and resilient natural, pure gum rubber tubes. These cost effective vacuum hoses have a good oxidation resistance, are vibration resistant and have excellent rebound characteristics. Durometer 45+-5. Meets or exceeds standard ZZ-T831C, minimum tensile strength 3000PSI. |
||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||
|
1/4" ID Silicone Vacuum HoseThick walled silicone vacuum hose with 1/4" (6.35mm) inside diameter and 1/2" (12.7mm) outside diameter. Sturdy, yet flexible material with wall thickness of 1/8" (3.2mm), will not collapse under vacuum. Can be used with NW/KF Multiple Hose Adapter to KF-16. Sold in lengths of 3 and 9 ft. go to Vacuum Desiccators |
|||||||||||||||
|
|
||||||||||||||||