Cassette Tank
|
PELCO HistoWave® Cassette System loaded and assembled.
|
Cassette Holder with cassettes may be rested on the tank to facilitate draining.
|
Marble Tile
May be used under Cassette Tank when more heat generation is required, in the Microwave Tissue Processor, for paraffin embedding. Order separately.
|
|
The PELCO HistoWave® Cassette System consists of a Cassette Tank and Cassette Rack. The design provides for ease of loading, unloading and fluid exchange during processing. The system will hold 26 standard-sized plastic cassettes or 22 standard and 2 over-sized cassettes. There is a hole in the handle for the temperature probe. The amount of reagent needed to cover 1 or 26 cassettes is approximately 500m. It is easiest to add solutions when the system is assembled. The system is made of microwave-compatible and solvent-resistant plastics. Note: The PELCO HistoWave® Cassette System may also be used in the PELCO TissueVac™ Vacuum Chamber, Prod. No's 36161 and 36160, which is an accessory for the PELCO BioWave® Pro and previous PELCO Microwave Processors.
Size of Standard Histology Cassette:
Length: 1.6" (4.06cm)
Width: 1.1" (2.86cm)
Depth: 0.28" (0.7cm)
Size of Over-Sized Histology Cassette:
Length: 1.7" (4.30cm)
Width: 1.1" (2.86cm)
Depth: 0.51" (1.30cm)
Dimensions of Cassette Holder (with handle):
79.4mm H x 111.2mm square (3.125" H x 4.375" sqare)
Inside Dimensions of Cassette Tank:
73mm D x 115.1mm square (2.875" D x 4.53" square)
Go to Histology for Embedding - Processing Cassettes
|
