Home Page Abbreviated Contents Customer Login Quick Order / View Order
Contact Us Search Indexes Finish Order

back to Cleaning, page 1

Branson Ultrasonic Cleaners
Ultrasonic Cleaning Solutions

Model 1510 - 1.9L
Model 2510 - 2.8L
Model 3510 - 5.7L
Model 5510 - 11.4L
Model B-3 - .47L
Model B-200 - .42L
PELCO Kleensonic™ Ultrasonic Cleaning Solutions
Branson Ultrasonic Cleaning Solutions
The Effects of Cleaners on Common Metal		 ultrasonic cleaners
Precision Cleaning Power
Ultrasonic cleaning is faster, more thorough and safer than most other methods. Scrubbing, soaking and steam don't even come close. It is powerful enough to remove proteins, waxes and heavy oils. It penetrates to deflux circuit boards and SMDs, yet is gentle enough to clean tiny precision assemblies. Ultrasonic sound waves moving through a cleaning solution create an effect called cavitation, the rapid formation and implosion of microscopic bubbles. Heat enhances the process. This is the source of ultrasonic effectiveness in cleaning. Very effective to clean specimens, lab tools, microscopy parts, embedded samples, specimen mounts, etc.

New Design
Leakproof and foolproof. Easier to handle and safer to fill. Sealed tight to prevent leaks. The controls are easily accessible and resistant to spills. The control board is mounted high and vertical, to stay dry.

Choice of Models
Ultrasonic Cleaners w/mechanical timer
Ultrasonic Cleaners w/heat/mechanical timer
Ultrasonic Cleaners w/digital heat, digital timer, de-gas and temperature monitor

De-gas Feature
Helpful at start-up. Ultrasonic pulses, activated before cleaning begins, remove unwanted air bubbles from the solution. This gives better results due to higher cleaning efficiency.

Digital Feature
Control of cycle time and temperature with clear readouts and one-touch setting. Maintains batch-to-batch consistently because the Cleaner resets automatically to the last time and temperature settings.

Accessories
Developed to make specimen handling easier. The most effective cleaning action occurs about one inch (2.5cm) from the tank's bottom. Using a tray gives more beneficial cleaning power.

branson ultrasonic cleaner

ultrasonic cleaner accessories
Accessories

Ultrasonic Cleaner Model 1510 (0.5 gallon)

(UL, CSA, ISO 9001 certified)
back up

Tank Size: 139.7 x 152.4 x 101.6mm (5.5 x 6 x 4")
Overall Size: 254 x 304.8 x 292mm (10 x 12 x 11.5" )
Tank Capacity: 1.91L (1/2 gal.); Weight: 3.18kg (7 lbs.)
Frequency: 40kHz
Cover included

Mechanical Timer, 80 watts

Prod #DescriptionUnitPriceOrder / Quote
17670
Ultrasonic Cleaner, Model 1510, 120 VAC
each
$408.10
Qty:
17670-2
Ultrasonic Cleaner, Model 1510, 230/240 VAC
each
492.00
Qty:

Mechanical Timer Plus Heater, 143 watts

Prod #DescriptionUnitPriceOrder / Quote
17672
Ultrasonic Cleaner, Model 1510, 120 VAC
each
$463.80
Qty:
17672-2
Ultrasonic Cleaner, Model 1510, 230/240 VAC
each
548.50
Qty:

Digital Control Plus Heater, De-gas and Digital Timer, 143 watts

Prod #DescriptionUnitPriceOrder / Quote
17674
Ultrasonic Cleaner, Model 1510, 120 VAC
each
$549.80
Qty:
17674-2
Ultrasonic Cleaner, Model 1510, 230/240 VAC
each
599.00
Qty:

Model 1510 Accessories (1/2 gallon= 1.9 liters)

Prod #DescriptionUnitPriceOrder / Quote
17301
Solid Insert Tray (1/2 gal)
each
$59.55
Qty:
17302
Perforated Insert Tray (1/2 gal)
each
66.40
Qty:
17303
Mesh Basket (1/2 gal)
each
64.70
Qty:
17304
Tank Cover (1/2 gal)
each
27.95
Qty:
17311
Beaker Holder, 1 x 600ml
each
32.60
Qty:

[BEAKERS] for Polypropylene, Pyrex®, and Stainless Steel Beakers for the Ultrasonic Cleaners.

ultrasonic cleaner

ultrasonic cleaner accessories
Accessories

Ultrasonic Cleaner Model 2510 (0.75 gallon)

(UL, CSA, ISO 9001 certified)
back up

Tank Size: 241.3 x 139.7 x 101.6mm (9.5 x 5.5 x 4" )
Overall Size: 343 x 304.8 x 292mm (13.5 x 12 x 11.5")
Tank Capacity: 2.81L (3/4 gal.); Weight: 4.07kg (9 lbs.)
Frequency: 40kHz
Cover included

Mechanical Timer, 130 watts

Prod #DescriptionUnitPriceOrder / Quote
17678
Ultrasonic Cleaner, Model 2510, 120 VAC
each
$545.00
Qty:
17678-2
Ultrasonic Cleaner, Model 2510, 230/240 VAC
each
686.50
Qty:

Mechanical Timer Plus Heater, 239 watts

Prod #DescriptionUnitPriceOrder / Quote
17680
Ultrasonic Cleaner, Model 2510, 120 VAC
each
$658.40
Qty:
17680-2
Ultrasonic Cleaner, Model 2510, 230/240 VAC
each
775.50
Qty:

Digital Control Plus Heater, De-gas and Digital Timer, 239 watts

Prod #DescriptionUnitPriceOrder / Quote
17682
Ultrasonic Cleaner, Model 2510, 120 VAC
each
$645.50
Qty:
17682-2
Ultrasonic Cleaner, Model 2510, 230/240 VAC
each
862.00
Qty:

Model 2510 Accessories

Prod #DescriptionUnitPriceOrder / Quote
17321
Solid Insert Tray (3/4 gal)
each
$79.80
Qty:
17322
Perforated Insert Tray (3/4 gal)
each
94.30
Qty:
17323
Mesh Basket (3/4 gal)
each
88.35
Qty:
17324
Tank Cover (3/4 gal)
each
33.90
Qty:
17325
Beaker Holder, 2 x 600ml
each
35.11
Qty:
17326
Beaker Holder, 2 x 250ml
each
41.30
Qty:

[BEAKERS] for Polypropylene, Pyrex®, and Stainless Steel Beakers for the Ultrasonic Cleaners..

ultrasonic cleaner

ultrasonic cleaner accessories
Accessories

Ultrasonic Cleaner Model 3510 (1.5 gallon)

(UL, CSA, ISO 9001 certified)
back up

Tank Size: 292.1 x 152.4 x 152.4mm (11.5 x 6 x 6")
Overall Size: 16 x 12 x 15.5" (406.4 x 304.8 x 368.3mm)
Tank Capacity: 5.71L (1.5 gal.); Weight: 5.44kg (12 lbs.)
Frequency: 40kHz
Cover included

Mechanical Timer, 130 watts

Prod #DescriptionUnitPriceOrder / Quote
17686
Ultrasonic Cleaner, Model 3510, 120 VAC
each
$893.80
Qty:
17686-2
Ultrasonic Cleaner, Model 3510, 230/240 VAC
each
1,032.00
Qty:

Mechanical Timer Plus Heater, 335 watts

Prod #DescriptionUnitPriceOrder / Quote
17688
Ultrasonic Cleaner, Model 3510, 120 VAC
each
$985.00
Qty:
17688-2
Ultrasonic Cleaner, Model 3510, 230/240 VAC
each
1,149.50
Qty:

Digital Control Plus Heater, De-gas and Digital Timer, 335 watts

Prod #DescriptionUnitPriceOrder / Quote
17690
Ultrasonic Cleaner, Model 3510, 120 VAC
each
$1,132.50
Qty:
17690-2
Ultrasonic Cleaner, Model 3510, 230/240 VAC
each
1,356.80
Qty:

Model 3510 Accessories

Prod #DescriptionUnitPriceOrder / Quote
17331
Solid Insert Tray (1-1/2 gal)
each
$99.30
Qty:
17332
Perforated Insert Tray (1-1/2 gal)
each
106.80
Qty:
17333
Mesh Basket (1-1/2 gal)
each
104.30
Qty:
17334
Tank Cover (1-1/2 gal)
each
36.40
Qty:
17335
Beaker Holder, 2 x 600ml
each
46.55
Qty:
17337
Beaker Holder, 3 x 250ml
each
39.90
Qty:

[BEAKERS] for Polypropylene, Pyrex®, and Stainless Steel Beakers for the Ultrasonic Cleaners.


ultrasonic cleaner accessories
Accessories

Ultrasonic Cleaner Model 5510 (2.5 gallon)

(UL, CSA, ISO 9001 certified)
back up

Tank Size: 292.1 x 241.3 x 152.4mm (11.5 x 9.5 x 6")
Overall Size: 406.4 x 393.7 x 368.3mm (16 x 15.5 x 14.5")
Tank Capacity: 11.37 (2.5 gallon) Weight: 6.34kg (14 lbs.)
Frequency: 40kHz
Cover included
Mechanical Timer, 185 watts

Prod #DescriptionUnitPriceOrder / Quote
17818
Ultrasonic Cleaner, Model 5510, 120 VAC
each
$1,093.00
Qty:
17818-2
Ultrasonic Cleaner, Model 5510, 230/240 VAC
each
1,594.00
Qty:

Mechanical Timer Plus Heater, 469 watts

Prod #DescriptionUnitPriceOrder / Quote
17820
Ultrasonic Cleaner, Model 5510, 120 VAC
each
$1,341.50
Qty:
17820-2
Ultrasonic Cleaner, Model 5510, 230/240 VAC
each
1,725.00
Qty:

Digital Control Plus Heater, De-gas and Digital Timer, 469 watts

Prod #DescriptionUnitPriceOrder / Quote
17822
Ultrasonic Cleaner, Model 5510, 120 VAC
each
$1,280.00
Qty:
17822-2
Ultrasonic Cleaner, Model 5510, 230/240 VAC
each
1,781.00
Qty:

Model 5510 Accessories

Prod #DescriptionUnitPriceOrder / Quote
17341
Solid Stainless Steel Insert Tray (2-1/2 gal)
each
$119.60
Qty:
17345
Beaker Holder, 4 x 600ml
each
51.30
Qty:

ultrasonic cleaner b3

Compact Ultrasonic Cleaner B-3 (1 pint)

intermediate ultrasonic cleaning, for smaller labs
UL, CSA, ISO 9001 certified
Model B-5 available for 220 volt service
back up

Smaller Cleaner for smaller jobs than the 1210-2210-3210 series. Furnished with small parts holder. Approximately 50 watts (UL).
Capacity: 0.47 liters (1 pint)
Housing: 12.7 x 12.7 x 15.9cm (5 x 5 x 6-1/4") (L x W x H)
Stainless tank: 7.6cm deep x 8.9cm diameter (3 x 3-1/2")
Hint: If you run the cleaner for 1-2 minutes and allow degassing of the cleaning solution before inserting parts, quicker and more effective cleaning will occur. Warm water helps.

Prod #DescriptionUnitPriceOrder / Quote
17030
Ultrasonic Cleaner, B-3, 120 VAC
each
$282.50
Qty:
17031
Ultrasonic Cleaner, B-5, 230 VAC
each
296.80
Qty:

small ultrasonic cleaner

Small Ultrasonic Cleaner B-200

practical working shape for many items such as eyeglasses
smaller applications; UL, CSA, ISO 9001 certified
back up

With small parts holder. Approximately 50 watts.
Capacity: 0.42 liters (15 oz.)
Housing: 21.3 x 11.1 x 11.7cm (8-5/8 x 4-7/16 x 4-5/8") (L x W x D)
Stainless tank: 16.5 x 8.9 x 5.0cm) (6-1/2 x 3-1/2 x 2") (L x W x D)
Useable dimensions within working basket: 15.9 x 8.3 x 42cm (6-1/4 x 3-1/4 x 1.65") (L x W x D).
Hint: If you run the cleaner for 1-2 minutes and allow degassing of the cleaning solution before inserting parts, quicker and more effective cleaning will occur. Warm water increases efficiency.

Prod #DescriptionUnitPriceOrder / Quote
17108
Ultrasonic Cleaner, Model B-200, 120 VAC
each
$169.80
Qty:
17108-2
Ultrasonic Cleaner, Model B-200, 230 VAC
each
198.40
Qty:

back up

PELCO Kleensonic™ Ultrasonic Cleaning Solutions

All PELCO Kleensonic™ ultrasonic cleaning solutions are formulated for high performance cleaning, are environmentally friendly, concentrated to reduce shipping costs and do not require hazardous shipping.

PELCO Kleensonic WRS Ultrasonic Wax Stripper

PELCO Kleensonic™ WRS Wax Stripper

PELCO Kleensonic™ WRS is an environmentally friendly cleaning compound in powder form formulated for removing mounting waxes used in specimen preparation, semiconductor processing and casting. Needs to be dissolved in water to make the cleaning solution. Primarily designed to dissolve and remove waxes and oils, but Kleensonic™ WRS can also be used to remove silicones, finishing compounds, soils and greases. PELCO Kleensonic™ WRS is compatible with parts or products made from silicon, glass, iron, aluminum zinc, copper, brass and magnesium. Highly recommended to use ultrasonic agitation to enhance cleaning process and to reduce cleaning time. Sold in container of 1 lb (makes 2.67 gallons).
Usage: 6 oz. (170grams) of powder concentrate in water makes 1 gallon (3.8ltr) of ultrasonic wax stripper solution, best working temperature 50 - 70°C.

Prod #DescriptionUnitPriceOrder / Quote
17388
PELCO Kleensonic WRS
1 lb.
$19.80
Qty:

go to Crystalbond Mounting Adhesive
PELCO Kleensonic CDC Ultrasonic Cleaning Detergent

PELCO Kleensonic™ APC Ultrasonic Cleaning Detergent

PELCO Kleensonic™ APC is a powerful liquid detergent for ultrasonic cleaning of semiconductor, silicon, glass and electronic materials/parts. The detergent formulation is of the multiple acting type with especially good solvent action. It possesses high sequestering ability, strong surface activity,good suspension and emulsification properties. Surface contaminants normally resistant to conventional detergents are readily removed. The balanced product formulation maintains an effective hydrophylic-hydrophobic balance. As a result of the effective detergent-water interface, which penetrates around soils and surface contaminants, ultrasonic action in cleaning is enhanced. Sold in bottle of 1 Qt. (makes 8 gallons)
Usage: (32:1) 4 fluid oz. of concentrate in 1 gallon (3.8 ltr) of water. Can be used at room temperature or elevated temperatures. The cleaning solution is readily rinsed off with demineralized water.

Prod #DescriptionUnitPriceOrder / Quote
17385
PELCO Kleensonic APC
1 qt.
$33.40
Qty:


PELCO Kleensonic CDC Ultrasonic Cleaning Powder Concentrate

PELCO Kleensonic™ CDC Ultrasonic Cleaning Powder Concentrate

PELCO Kleensonic™ CDC is a high performance, heavy-duty ultrasonic yet environmentally friendly cleaning powder. Fast acting, long lasting and saves costs, space and time. It is easy to handle, completely biodegradable, odorless, ammonia-free and non-flammable. PELCO Kleensonic™ CDC cleans and degreases and can be used for removing oils, greases, fingerprints, dust, packaging particulates, soils and buffing and polishing compounds. It is safe to use on all types of metals, including aluminum and magnesium (if rinsed promptly), glass, ceramics, plastic and rubber components. Application examples are cleaning of mechanical parts, electronic components and specimens after grinding, lapping or polishing. Sold in container of 2 lbs (makes 75 gallons).
Usage: (400:1) 1/3 oz. of powder concentrate in 1 gallon (3.8 ltr) of water. Scoop is provided in container. Best results with warm or hot water. Immerse parts and ultrasonicate for 1-5 minutes. Rinse thoroughly in water after cleaning.

Prod #DescriptionUnitPriceOrder / Quote
17386
PELCO Kleensonic CDC Powder Concentrate
2 lb.
$58.40
Qty:

Branson Ultrasonic Cleaning Solutions

ultrasonic cleaner solutions

MC-1 Metal Cleaner

Biodegradable, phosphate and caustic free alkaline cleaner formulated for heavy duty industrial use. Removes oils, greases and a wide variety of soils from aluminum and aluminum alloys as well as copper, brass, and steel substrates. Effective in removing stamping and cutting lubricants, and light polishing media. MC-1 displaces soils and floats them to the surface for easy removal with a skimmer.
MSDS Corrosive (contains phosphates), Use 3 to 10% concentration by volume, 7% optimum (1 quart makes 3.5 gallons @ 7%).

Prod #DescriptionUnitPriceOrder / Quote
17360
MC-1 Metal Cleaner, 1 gallon solution concentrate
each
$31.90
Qty:
17360-1
MC-1 Metal Cleaner, 1 quart solution concentrate
each
14.38
Qty:

JC Jewelry Cleaner

Biodegradable, phosphate-free alkaline cleaner for cleaning jewelry and precious metals. Removes general soils, particulates, fingerprints, oils, and oxides that accumulate with normal use. Gemstones and precious metals alike are quickly and safely restored to their original brilliance with this free-rinsing solution.
MSDS Corrosive (contains sodium metasilicate), 1 quart (0.95L) makes 3 gallons (10.8L)

Prod #DescriptionUnitPriceOrder / Quote
17374
JC Jewelry Cleaner (soils, prints, gems, rings), 1 quart solution concentrate
each
$11.98
Qty:

GP - General Purpose Cleaner

Biodegradable caustic-free alkaline cleaner. Removes general soils, fingerprints, dust, packaging particulates, and light oils and greases from components in general manufacturing areas, instrument shops, telecommunications applications, and other light industrial manufacturing and fabricating facilities.
MSDS Corrosive (contains sodium metasilicate), 1 quart (0.95L) makes 3 gallons (10.8L)

Prod #DescriptionUnitPriceOrder / Quote
17381
GP General Purpose Cleaner Solution (soils, prints, tissue, light oils), 1 quart solution concentrate
each
$10.20
Qty:

OR - Oxide Remover

Blend of detergents and acidic chemistries which is both phosphate-free and biodegradable. Rapidly removes rust and oxides from all metals It is used in cleaning and reconditioning materials and components requiring removal of oxides that result from storage or assembly operations
MSDS 1 gallon (3.8L) makes 16 gallons (60.8L)

Prod #DescriptionUnitPriceOrder / Quote
17382
OR Oxide Remover (rust, metal oxides), 1 gallon concentrate
each
$45.20
Qty:

IS - Industrial Strength Cleaner

Biodegradable phosphate and caustic-free alkaline cleaner for heavy industrial use. Removes grease, oils, and particulates from automotive, aircraft, and similar mechanical components; oils and lubricants from machined parts and stampings in machine and metalworking shops. It is often used by chemical plants, petrochemical refineries, appliance factories, telecommunications equipment producers, printing plants, and other industrial manufacturing and fabricating facilities.
MSDS Corrosive (contains sodium metasilicate)

Prod #DescriptionUnitPriceOrder / Quote
17383
IS Industrial Strength Cleaner (cutting oils, metal chips, grease, carbon), 1 gallon
each
$30.00
Qty:
17383-1
IS Industrial Strength Cleaner (cutting oils, metal chips, grease, carbon), 1 quart
each
10.50
Qty:

OC - Optical Cleaner

Alkaline, non-foaming, liquid detergent formula for the optical, glass and lens manufacturing industry. Removes general soils, fingerprints, cerium oxide, pitch, and blocking waxes from optical lenses. It is very effective in removing polishing compounds from glass and optical surfaces prior to deposition of coatings. MSDS

Prod #DescriptionUnitPriceOrder / Quote
17380
OC Optical Cleaner, 1 gallon
each
$29.45
Qty:


The Etching Effects of Solutions on Common Metals / Alloys
Solution Steel Brass Aluminum Magnesium Zinc Stainless Steel Tin
MC-1 Metal none none none none none none none
JC Jewelery none none none none none none none
GP General Purpose none none slignt attack none none none none
OR Oxide Remover slight etch none slight attack attacks attacks none none
IS Industrial Strength none none slight attack none none none none
OC Optical none none none none* none none none*

* No effect if solution temperature is less than 60°C (140° F).
Solution concentrations may vary. The amount used depends on the particular solution and the type of soil to be removed. Follow the instructions on the solution container.

back up


Privacy Policy |
Copyright © 1996-2008 Ted Pella, Inc., All rights reserved. All trademarks are the property of their respective owners.

Page Last Updated: February 28, 2008