|
back up
|
Personal Photographic Print Trimmer
The Print Trimmer gives a sharp, clean trim of photo prints. It uses a standard low cost replaceable single edge razor blade. Only 5-1/2" wide and 17-1/2" long (14 x 44.5cm), the Trimmer handles prints up to 14" (35.6cm). It weighs only 1 lb. (0.45kg) and hangs on the wall for easy storage. The design lets you see exactly what and where you're cutting. It has a special compartment for holding extra blades, inch and metric scales, and a fully enclosed blade that cuts only when pressure is applied to the blade housing. 5 single edge blades are included.
| Prod # | Description | Unit | Price | Order / Quote |
|---|
| Personal Photographic Print Trimmer | | |
|
| Replacement Blades | | |
|
|
|
back up
|
Print Positioner
Now anyone can professionally position any size photographic print on a mounting board in seconds, without making a single pencil mark! No difficult measuring, dividing, or drawing lines. No guessing at the correct proportion between top and bottom borders. Any print can be instantly positioned for attractive display in less than 10 seconds.
| Prod # | Description | Unit | Price | Order / Quote |
|---|
| Print Positioner | | |
|
|
|
back up
|
Photo Mounting Board
both sides white
14-ply (0.050", 1.27mm) thick
8-1/2 x 11" (21.6 x 27.9cm)
| Prod # | Description | Unit | Price | Order / Quote |
|---|
| 14 ply Photo Mount Board | | |
|
| 14 ply Photo Mount Board | | |
|
Photo Mounting Board
6-ply (0.026", 0.66mm) thick
8-1/2 x 11" (21.6 x 27.9cm)
| Prod # | Description | Unit | Price | Order / Quote |
|---|
| 6 ply Photo Mount Board | | |
|
| 6 ply Photo Mount Board | | |
|
|
 |
Gepe™ Glass 35mm Slide Mounts
Protect your slides from the effects of pollution, dust, fingerprints, scratches and projection heat. The Gepe glass slide mount keeps your slide absolutely flat and eliminates "popping" during projection to insure a sharp image over the complete slide. Air circulation is provided by a unique dustproof ventilation system. The metal mask clips permit easy insertion of your transparency. Once you have inserted your transparency into the film clips simply use slight hand pressure to close the two halves together; they can be reopened just as easily.
|
| Prod # | Description | Unit | Price | Order / Quote |
|---|
| SB-Glass Slide Mounts | | |
|
| Also available as glassless mounts: |
| Gepe™ Glassless Slide Mounts | | |
|
| Gepe™ Super Slides, 40mm x 40mm: |
| Gepe™ Super Slides, 40mm x 40mm | | |
|
|
