PELCO^® Specimen Mounts and Holders
for the JEOL NeoScope Benchtop SEM

The NeoScope Benchtop SEM Adapter Kit needs to be fitted on the NeoScope specimen stage to enable using the PELCO^® specimen holders. The adjustable height pillars allow for easy height adjustment needed for the NeoScope SEM. The top of the adjustable height pillar is fitted with an M4 screw, so any holder or mount with an M4 threaded hole can be mounted as long as the total height of the stage adapter, pillar, specimen holder and sample does not exceed a total height of 50mm. Just make sure the top of the specimen is level with the top of the height gauge supplied with the stage adapter kit and the specimen will fit into the NeoScope SEM.
Technical Notes

Prod #	Description	Unit	Price	Order / Quote
15398	NeoScope Stage Adapter Kit, includes base plate adapter, 18mm and 25mm adjustable height adapters and height gauge.	each	$125.00	Qty:
15398-10	NeoScope Stage Base Adapter plate.	each	85.00	Qty:
15365-2	18mm Adjustable Height Pillar	each	40.00	Qty:
15374-2	25mm Adjustable Height Pillar	each	40.00	Qty:

Adjustable Profile Holder

Designed to adjust the exact viewing angle for cross section made from wafers or other thin specimens up to a thickness of 3.2mm (1/8"). Angle adjustment range 0-90°. Made of aluminum with stainless steel allen screw. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15356-4	Adjustable Profile Holder	each	$120.00	Qty:

Compact Variable Tilt Mount

Variable Tilt Specimen Holder

Accommodates specimens with a size up to 26 x 20mm or pin stubs up to 18mm (.7") diameter. Tilts 0 - 90° with 10° markings. Additional markings for 30°, 45°, and 70°. Tilt table size is 26 x 20mm, overall size is 33 x 20 x 19mm H. Made of aluminum with stainless steel screws. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15450-4	Variable Tilt Specimen Holder, M4	each	$275.00	Qty:

Accepts 15mm M4 mounts on pin with M4 thread. Pin can be rotated and fixed for optimum position. When the pin with M4 thread is removed, this holder also accepts a standard 12.7mm (1/2") pin stub with 3.2mm (1/8") pin. Material: machined aluminum with stainless steel Allen set screw. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15428-45	45° Pre-Tilt Holder, M4	each	$45.00	Qty:

Adjustable Spring-Loaded Vise Clamp

The Adjustable Spring-Loaded Vise Clamp holds various sizes and shapes of specimens. Vise clamps between 10 - 25mm. Made of vacuum grade aluminum and stainless steel. Vise size is 45 x 20mm.

Prod #	Description	Unit	Price	Order / Quote
15384-2	Adjustable Spring-Loaded Vise Clamp	each	$350.00	Qty:

Micro Vise Holder

Holds a variety of specimens. The maximum gap is 11mm (7/16"). The jaws are 25.4mm (1") wide. Made of aluminum with stainless steel screw. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15340-4	Micro Vise Holder, M4	each	$115.00	Qty:

Thin Specimen Split Mount Holder

Simple but effective design to hold wafers and thin samples up to 3.2mm (1/8). 15mm dia x 10mm H. Made of aluminum with stainless steel allen screws. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15335-4	Thin Specimen Split Mount Holder, M4	each	$24.00	Qty:

Large Set Screw Vise

Set screw vise with an open slot of 10mm (.394") wide x 5mm (0.197") deep. ø25mm (1") x 10mm (0.394") high. Material: machined aluminum with stainless steel set screw. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
16371	Large Set Screw Vise, Ø25x10mm H, M4	each	$29.60	Qty:

Double Slotted Mini Vise

Double slotted set screw vise with 2 ea. 1mm wide x 3mm deep slots to clamp thin specimens or cross sections. Simple but effective design to hold wafers and thin samples up to 1mm (.039") thick. 15mm dia x 6mm H. Made of aluminum with 2 stainless steel allen set screws. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
16341	Double Slotted Set Screw Vise, M4, Ø15 x 6mm H	each	$21.40	Qty:

Large Double Slotted Vise

Large Double Slotted Set Screw Vise with 2 ea. 2.5mm by 5mm deep slots. Dimensions ø25x10 mm (1 x 0.4"). Clamp thin specimens and cross sections without the need for tape of conductive paint. Material: machined aluminum with 2 stainless steel allen set screws. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
16372	Large Double Slotted Set Screw Vise, Ø25mm x 10mm H, M4	each	$29.80	Qty:

Single Pin Stub Holders

For holding and viewing SEM mounts with the standard 3.2mm pin. Made of aluminum, includes a pin locking screw. Two different heights are available: 10, 15mm. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15363-1	Single Pin Stub Holder Ø15x10mm H	each	$25.00	Qty:
15363-2	Single Pin Stub Holder Ø15x15mm H	each	22.50	Qty:

Multi Holder for 4 Pin Stubs

Accommodates up to four standard 12.7mm (1/2") pin stubs with 3.2mm (1/8) pin. Made of aluminum with stainless steel set screws. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15310-4	Multi Holder for 4 Pin Stubs	each	$49.00	Qty:

Cylinder Holder, 22mm (7/8")

Specimen holder for cylinders up to 22mm (7/8") diameter. Made of aluminum with stainless steel allen screw. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15402	Specimen holder for cylinders up to 22mm (7/8")	each	$39.00	Qty:

Metallographic Mount Holder, 1" and 25mm

Specimen holder for 1" or 25mm metallographic mounts. Made of aluminum with stainless steel allen screw. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15403	Metallographic Mount Holder, 1" or 25mm	each	$46.00	Qty:

Metallographic Mount Holder, 1-1/4" and 30mm

Specimen holder for 1-1/4" or 30mm metallographic mounts. Made of aluminum with stainless steel allen screw. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15404	Metallographic Mount Holder, 1-1/4" or 30mm	each	$54.00	Qty:

Metallographic Mount Holder, 1-1/2" and 40mm

Specimen holder for 1-1/2" or 40mm metallographic mounts. Made of aluminum with stainless steel allen screw. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15405	Metallographic Mount Holder, 1-1/2" or 40mm	each	$68.00	Qty:

Metallographic Mount Holder, 2" and 50mm

Specimen holder for 2" or 50mm metallographic mounts. Made of aluminum with stainless steel allen screw. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15406	Metallographic Mount Holder, 2" or 50mm	each	$74.00	Qty:

Bulk Specimen Holder

The bulk specimen holder holds irregular and round specimens up to a diameter of 32mm (1-1/4"). Made of aluminum with two sets of stainless steel allen screws. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15308-4	Bulk Specimen Holder, M4	each	$85.00	Qty:

Straight Bulk Specimen Holder

Versatile specimen holder to clamp irregular or long shaped specimens. Opening is 15.9W x 25.4L x 9.5mm D (5/8" x 1" x 3/8"). Made of aluminum with stainless steel allen screws. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15320-4	Straight Bulk Specimen Holder, M4	each	$82.00	Qty:

Multipurpose Specimen Holder

Accepts up to 25.4mm (1") diameter specimens. The slotted design also allows for clamping elongated or rod shaped specimens. Made of aluminum with stainless steel allen screw. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15305-4	Multi Purpose Specimen Holder, M4	each	$62.00	Qty:

45°/90° Combination Holder

Combined specimen holder for 90° cross sections of wafers or thin samples up to 6.35mm (1/4") and a pin stub at 45°. Made of aluminum with stainless steel set screws. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15358-4	45° / 90° Combination Holder, M4	each	$94.00	Qty:

Multi Holder for 5 JEOL Stubs

Holds up to five 9.5mm JEOL cylinder mounts. Made of aluminum with stainless steel set screws. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15315-4	Multi Specimen Holder for JEOL Stubs, M4	each	$62.00	Qty:

JEOL or ISI/ABT/Topcon Mounts Adapter

Small cylinder mount adapter accommodates JEOL or ISI/ABT/Topcon ø9.5, ø12.2mm, and ø15mm cylinder mounts. Made from aluminum with stainless steel screw, Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15401	Adapter Holder for Cylinder Mounts, M4	each	$36.00	Qty:

Small PELCO SEMClamp™ 15 x 10mm

SEMClamp™ holder 15mm (0.6") long with 10mm (0.4") wide clamping area. Convenient holder for clamping down samples up to a thickness of 7mm under the clamping strips. Overall dimensions 23 x 20 x 9mm (0.9 x 0.8 x 0.35"). Material: machined aluminum with brass screws.

Prod #	Description	Unit	Price	Order / Quote
15347-4	Small PELCO SEMClamp™ 15 x 10mm, M4	each	$86.00	Qty:

Medium PELCO SEMClamp™ 25 x 15mm

SEMClamp™ holder 25mm (1") long with 15mm (0.6") wide clamping area. Convenient holder for clamping down samples up to a thickness of 7mm under the clamping strips. Overall dimensions 33 x 25 x 9mm (1.25 x 0.8 x 0.35"). Material: machined aluminum with brass screws.

Prod #	Description	Unit	Price	Order / Quote
15348-4	Medium PELCO SEMClamp™ 25 x 15mm, M4	each	$95.00	Qty:

Recessed PELCO SEMClamp™ 15 x 10mm

5mm recess allows for background free imaging and no contact with sample surface in imaging area. Clamping area is 15mm (0.6") long and 10mm (0.4") wide. Maximum thickness 7mm under the clamping strips. Overall dimensions 23 x 20 x 12mm (0.9 x 0.8 x 0.48"). Material: machined aluminum with brass screws.

Prod #	Description	Unit	Price	Order / Quote
15346-4	Recessed PELCO SEMClamp™ 15 x 10mm, M4	each	$96.00	Qty: