Material Safety Data Sheet
Product No. 26956 KODAK Indicator Stop Bath
Issue Date (01-17-07)
Review Date (07-25-07)
Section 1: Product and Company Identification
Product Name: KODAK Indicator Stop Bath
Synonym: PCD 2838
Supplier: Eastman Kodak Company, Rochester, New York, 14650
Company Name
Ted Pella, Inc. and PELCO International, P.O. Box 492477, Redding, CA
96049-2477
Domestic Phone (800) 237-3526 (Mon-Thu. 6:00AM to 4:30PM PST; Fri 6:00AM
to 4:00PM PST)
International Phone (01) (530) 243-2200 (Mon-Thu. 6:00AM to 4:30PM PST; Fri 6:00AM to 4:00PM PST)
Chemtrec Emergency Number 1-800-424-9300 24 hrs a day.
Section 2: Composition / Information on Ingredients
|
Components: Principle Hazardous
Component(s) |
% |
OSHA mg/m3 |
ACGIH |
NTP |
IARC |
OSHA |
|
Acetic acid (64-19-7) |
85 – 90 |
25 |
10 PPM |
No |
No |
No |
Section 3: Hazard Identification
Emergency overview
Appearance: Light yellow liquid.
Immediate effects: Danger! Poison. May be fatal or harmful if swallowed. Dust, mist or vapor extremely irritating to the eyes and respiratory tract. Causes severe skin and eye burns. Combustible liquid and vapor.
Potential health effects
Primary Routes of entry: Inhalation, ingestion, eyes and skin.
Signs and Symptoms of Overexposure:
Eyes: Causes severe eye burns. Vapor extremely irritating to the eyes.
Skin: Causes severe skin burns.
Ingestion: May be fatal or harmful if swallowed. May cause burns of the gastrointestinal tract if swallowed.
Inhalation: Vapor extremely irritating to the respiratory tract.
Chronic Exposure: ND
Chemical Listed As Carcinogen Or Potential Carcinogen: None.
See Toxicological Information (Section11)
Potential environmental effects
See Ecological Information (Section 12)
Section 4: First Aid Measures
If accidental overexposure is suspected
Eye(s) Contact: Immediately flush with plenty of water for at least 15 minutes. Get medical attention immediately.
Skin Contact: Immediately flush with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention immediately. Wash contaminated clothing before reuse. Destroy or thoroughly clean contaminated shoes.
Inhalation: Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention immediately.
Ingestion: Concentrate: Do NOT induce vomiting. Give victim a glass of water. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person.
Note to physician
Treatment: ND
Medical Conditions generally Aggravated by Exposure: Acute overexposure to extremely high airborne concentrations of respiratory irritants has been associated with development of an asthma-like reactive airways syndrome (RADS) in susceptible individuals.
Section 5: Fire Fighting
Measures
Flash Point: 53°C (128°F) (Setaflash closed cup)
Flammable Limits: ND
Auto-ignition point: ND
Fire Extinguishing Media: Water spray, carbon dioxide (CO2), dry chemical,
alcohol foam.
Special Fire Fighting Procedures: Wear self-contained breathing apparatus and
protective clothing. Use water spray to keep fire-exposed containers cool.
Unusual Fire and Explosion Hazards: Concentrate: Carbon dioxide, carbon
monoxide.
Hazardous combustion products: Classified as combustible. Material contains a combustible solvent that may accumulate in the container headspace.
DOT Class: Corrosive and flammable.
Section 6: Accidental Release
Measures
Steps to be Taken in Case Material is Released or Spilled: Eliminate all
ignition sources. Absorb spill with vermiculite or other inert material, then
place in a container for chemical waste. Clean surface thoroughly to remove residual
contamination.
Waste Disposal Methods: Dispose of waste according to Federal, State and Local
Regulations.
Section 7: Handling and
Storage
Precautions to be Taken in Handling and Storage: Do not breathe vapor at
concentrations greater than the exposure limits. Use only with adequate
ventilation. Keep from contact with oxidizing materials. Keep away from heat
and flame. Keep container closed.
Storage temperature: Ambient
Storage Pressure: NA
Section 8: Exposure Controls / Personal Protection
Engineering Controls
Ventilation required: Good general ventilation (typically 10 air changes per hour) should be used. Use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits.
Personal Protection Equipment
Respiratory protection: If engineering controls do not maintain airborne concentrations below recommended exposure limits, an approved respirator must be worn. Respirator type: Full-face organic vapor cartridge.
Protective gloves: Wear
impervious gloves.
Skin protection: Appropriate protective clothing.
Eye protection: Concentrate: If a full-face respirator is not worn, wear
vapor-tight chemical goggles. Working solution: Wear safety glasses with side
shields (or goggles).
Additional clothing and/or equipment: Eye bath, safety showers, and washing
facilities.
Exposure Guidelines
See Composition/Information on Ingredients (Section2)
Section 9 Physical and
Chemical Properties
Appearance and Physical State: Light yellow liquid.
Odor (threshold): Sharp vinegar;
Specific Gravity (H2O=1): 1.07
Vapor Pressure (mm Hg @ 20 °C [68 °F]): 19.5 mbar (14.6 mm Hg)
Vapor Density (air=1): 1.9
Percent Volatile by volume: 100 %
Evaporation Rate (butyl acetate=1): ND
Boiling Point: >100°C (>212°F)
Freezing point / melting point:
ND
pH: Concentrate: < 2;
Solubility in Water: Complete
Molecular Weight: NA
Section 10: Stability and
Reactivity
Stability: Stable
Conditions to Avoid: ND
Materials to Avoid (Incompatibility): Strong oxidizing agents, bases.
Hazardous Decomposition Products: ND
Hazardous Polymerization: Will not occur.
Section 11: Toxicological Information
Results of component toxicity test performed: Acetic acid (64-19-7): Oral LD50 (rat): 3,310 - 3,530 mg/kg. Oral LD50: 4,960 mg/kg. Inhalation LC50: 5620 ppm / 1.00 hr. Dermal LD50: 1,060 mg/kg
Skin irritation: severe. Eye irritation: severe.
General advice: Contains: Acetic acid. Acute overexposure to extremely high airborne concentrations of respiratory irritants has been associated with development of an asthma-like reactive airways syndrome (RADS) in susceptible individuals. Extremely high airborne concentrations are not generated during normal conditions of use but may occur following a spill. The potential to generate extremely high airborne concentrations in a spill situation depends upon physical factors such as the concentration of the solution, the volume of the spill, the surface area of the spill, the size of the room where the spill occurred, and the ventilation rate in the room.
Inhalation: Airborne dust/mist/vapor extremely irritating.
Eyes: Causes severe eye burns. Airborne dust/mist/vapor extremely irritating.
Skin: Causes severe skin burns.
Ingestion: May be fatal or harmful if swallowed. May cause burns of the gastrointestinal tract if swallowed.
This product does not contain any compounds listed by NTP or IARC or regulated by OSHA as a carcinogen.
Section 12: Ecological Information The following properties are ESTIMATED from the components of the preparations:
Potential
Toxicity:
Toxicity to fish (LC50): 10 - 100 mg/l
Toxicity to daphnia (EC50): 10 - 100 mg/l
Toxicity to algae (IC50): > 100 mg/l
Toxicity to other organisms (EC50): > 100 mg/l
Ecological Information: Chemical Oxygen Demand (COD): 940 g/l. Biochemical Oxygen Demand (BOD): 680 g/l
Chemical Fate Information: Persistence and degradability: Readily biodegradable
Section 13 Disposal Considerations
RCRA 40 CFR 261 Classification: Emptied containers retain product residue, follow label warnings even after container is emptied. Contract with a licensed chemical disposal agency.
Federal, State and local laws governing disposal of materials can differ. Ensure proper disposal compliance with proper authorities before disposal.
Section 14: Transportation Information
US DOT Information: Proper shipping name: Acetic acid solution
Hazard Class: 8, 3
Packaging group: II
UN Number: UN2789
IATA: Proper shipping name: Acetic acid solution
Hazard Class: 8, 3
Packing group: II
UN Number: UN2789
IMO: Proper shipping name: Acetic acid solution
Class: 8, 3
UN Number: UN2789
Packing group: II
Marine Pollutant: No
Canadian TDG: Proper shipping name: Acetic acid solution
Section 15: Regulatory Information
United States Federal Regulations
MSDS complies with OSHA’s Hazard Communication Rule 29, CFR 1910.1200.
SARA: Section 302: None listed
SARA Title III: Section 313: Not listed
RCRA: Not listed
TSCA: Listed TSCA inventory.
CERCLA: Acetic acid (64-19-7): RQ = 5000 lbs (2270 kg).
State Regulations
California Proposition 65: None
International Regulations
Canada WHMIS: Materials in this product are listed in the CPR Inventory List.
Europe EINECS Numbers: Acetic acid (64-19-7): EINECS#: 200-580-7.
KECI (KR): Negative listing: Bromcresol Purple (115-40-2) or Phenol, 4,4'-(1,1-dioxido-3H-2,1-benzoxathiol-3-ylidene)bis(2-bromo-6-methyl
Section 16: Other Information
Label Information: CONTAINS: Acetic acid (64-19-7). Danger! Poison. May be fatal or harmful if swallowed dust, mist or vapor extremely irritating to the eyes and respiratory tract causes severe skin and eye burns combustible liquid and vapor. Do not breathe vapors or spray mist. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Use only with adequate ventilation. Wash thoroughly after handling.
European Risk and Safety Phrases: ND
European symbols needed: ND
Canadian WHMIS Symbols: ND
NFPA Hazard Rating: Concentrate: Health: 2; Fire: 2;
Reactivity: 0
NOTE: NFPA 704 (2007) hazard indexes involves data review and interpretation that may vary among companies. It is intended only for rapid, general identification of the magnitude of the potential hazards. To adequately address safe handling, ALL information in this MSDS must be considered.
(0=least, 1=Slight, 2=Moderate, 3=High, 4=Extreme)
Abbreviations used in this document
NE= Not established
NA= Not applicable
NIF= No Information Found
ND= No Data
Disclaimer
Ted Pella, Inc. makes no warranty of any kind regarding the information
furnished herein. Users should independently determine the suitability and
completeness of information from all sources. While this data is presented in
good faith and believed to be accurate, it should be considered only as a
supplement to other information gathered by the user. It is the User's
responsibility to assure the proper use and disposal of these materials as well
as the safety and health of all personnel who may work with or otherwise come
in contact with these materials.
MSDS Form 0013F1 V2