| Home Page | Abbreviated Contents | Customer Login | Quick Order / View Order | |
|---|---|---|---|---|
| Contact Us | Search | Indexes | Finish Order | |
| Half grid Lift-Out TEM sample holder, made of copper/beryllium, are approximately 100µm thick, slot is 2mm wide x 0.5mm deep. The sturdy holders offer easy handling and good protection for the TEM sample. |
|
|
|
|
The Omniprobe lift out grids are specifically designed to accept the TEM lamella's milled out by FIB or SEM/FIB systems. Typical thickness of the grids is 25-30µm. The posts are designed for optimum access and provide a secure area for attaching (welding) the lamella(s). The Omniprobe grids fit standard TEM holders and provide a non-obscured view of the thin sections attached to the posts. |
||||||||||||||||||||||
|
|
|||||||||||||||||||||
|
|
|||||||||||||||||||||
|
|
|||||||||||||||||||||
0.5 x 0.5mm |
1.0 x 1.0mm |
1.5 x 0.5mm |
The PELCO® Silicon Aperture Frames are 3mm disk type frames with a thickness
of 200µm and square or rectangular apertures. They are made with the same clean
state-of -the-art manufacturing techniques as the
PELCO® Silicon Nitride Support Films.
The Silicon Nitride has been removed and leaves a silicon frame.
They are perfectly round shaped 3mm frame featuring the Easygrip™ edge for easy handling.
No broken edges and free of debris often associated with other manufacturing processes.
Offered with three sizes of openings: 0.5 x 0.5, 1.0 x 1.0 and 1.5 x 0.5mm.
Fully compatible will standard 3mm TEM holders.
Window angle toward the back is 35.26 degrees, which results in aperture dimensions:
|