in 


back to Immuno Gold Stains Overview

Silver Enhancement Kits, Protein and
Nucleic Acid Stains

BIOBOND™ Mounting Media

Blocking Agents, Capture Solution

for electron microscopy sample preparation

 

Silver Enhancement Kit for Light and Electron Microscopy

A light insensitive kit designed for the amplification (10-100x) of gold label on grids or slides. When the kit components are mixed, metallic silver is deposited on the gold label.
NOTE: Enhancement times that do not exceed 2 minutes will greatly reduce nonspecific background. A second or third 2 minute enhancement will usually produce sharp, clean results.

Kit Components: 15ml of Developer - 15ml of Enhancer.
SDS (20KB PDF)

Prod # Description Unit Price Order / Quote
15718 Silver Enhancement Kit for Light and Electron Microscopy 30ml $135.00
Qty:
Storage Conditions: Store at 4°C or -25°C




Silver Enhancement Kit for Proteins and Nucleic Acids

A light insensitive kit designed for the amplification (10-100x) of gold labeled dots or blots on membranes. When the kit components are mixed, metallic silver is deposited on the gold labeled proteins or nucleic acids. The kit is designed for use with PROTOGOLD® and GENOGOLD® Staining Kits.

Kit Components: 250ml of Developer - 250ml of Enhance. SDS (20KB PDF)

Prod # Description Unit Price Order / Quote
15719 Silver Enhancement Kit for Proteins and Nucleic Acids 500ml $190.00
Qty:
Storage Conditions: Store at 4°C or -25°C




PROTOGOLD® - Protein Staining Kit

The kit is intended for use with negatively charged membranes like nitrocellulose or polyvinylidene difluoride (PVDF). Up to 1µg per band or dots is recommended. The gold particles are negatively charged and suspended in a low pH solution. The stain is permanent and can be enhanced 10-100x with Prod. No. 15719 Silver Enhancement Kit. The kit will stain over 20 blots with high intensity.

Kit Components: 500ml of Protogold Sol - 5ml of Detergent.
SDS (20KB PDF)

Prod # Description Unit Price Order / Quote
15720 PROTOGOLD® - Protein Staining Kit 500ml $190.00
Qty:
Storage Conditions: Store at 4°C - DO NOT FREEZE




Section Adhesive - Mounting Media

BIOBOND™ - Tissue Section Adhesive

Supplied in 20ml volumes and used as a 2% solution in acetone for coating slides. Use fresh solution each time.

SDS (PDF 30KB)

There are Hazard Shipping Fees associated with this product. - Hazard Shipping Fees

PELCO® Technical Notes, BIOBOND™ Tissue Section Adhesive (20ml) Prod. No. 15715 (PDF 91K)

Prod # Description Unit Price Order / Quote
15715 BIOBOND™ - Tissue Section Adhesive, 20ml $65.00
Qty:
Storage Conditions: Store at room temperature




Blocking Agents

Prod # Description Unit Price Order / Quote
15713 Tween 20® 10ml $12.10
Qty:
Storage Conditions: Store at room temperature
15717 Cold Water Fish Gelatin, 45% 10ml 22.00
Qty:
Storage Conditions: Store at room temperature

15717 Cold Water Fish Gelatin, 45%
SDS (110KB PDF)