Wheaton Staining Dishes
We offer a variety of staining dishes and Coplin jars suitable for staining in pathology,
microscopy, microbiology and hematology. Staining is a contrast-enhancing procedure
used to prepare samples for microscopic examination. In light microscopy, specimens
are colored using various dyes, many of which are selective; that is, they stain
a specific type of tissue, bacteria, or cellular component. Several stains may be
used in sequence to produce a counterstained sample.
Stains are classified as acidic, basic or neutral, depending on the nature of the
stain's colored radicals. Acidic stains tend to react with cytoplasm, whereas basic
stains are taken up by nucleic acids. In electron microscopy, the term "staining"
may be applied to procedures wherein electron-dense materials such as salts or osmium,
uranium and lead bind to and increase the electron density of various cell constituents.
For example, Aniline Blue is an acidic, water-soluble dye used to stain connective
tissue. This dye is valuable for visualizing connective tissue fibers beneath epithelia
within glands and muscles. Aniline Blue colors collagen fiber dark blue, mucous and
cartilage matrix light blue, and nerve tissue lilac. It can be used as a counterstain
with red nuclear dye. Concentrations as low as +/-1% can be used to evaluate thick
sections of resin-embedded material for electron microscopy.
Dishes, covers and racks are manufactured from soda-lime glass and resist stains
from Eosin or Hemotoxylin. Staining dishes are available in many configurations to
accommodate up to 50 slides, with various glass and stainless steel racks.
Coplin jars can be used for pre-staining with and alcohol buffer. Slides are held
vertically for easy manipulation. A Coplin jar can also serve as a preparation chamber
for micro-thin-layer chromatography.
Wheaton staining dishes have been used for a variety of procedures to clean slides
and coat them with a variety of materials (for example, Bain, J.R.; Hoffman, A.S.
Glycophase glass revisited: Protein adsorption and cell growth on glass surfaces
bearing immobilized monosaccharides, Biomaterials, in press 2002). Wheaton staining
dishes have also been used for poly lysine and silane slide coatings.
Note: Wheaton staining dishes are not autoclavable or microwaveable, and are not
intended for use at temperatures below 15°C or above 80°C.
|
Wheaton Staining Dish
These mix-and-match components offer greater flexibility in meeting your requirements.
This staining dish accommodates 16, 30 and 40 slide racks, listed below. Manufactured
from Wheaton soda lime glass.
Approximate inside dimensions (LxWxH): 120 x 90 x 70mm (4.72" x 3.54" x 2.75")
| Prod #
| Description
| Unit
| Qty
| Price
| Order / Quote
|
21054
| Dish and Cover
| set
| 1-5
| $74.95
|
|
6+
| 71.45
|
| 21054-1
| Dish only
| each
| 1-2
| 56.85
|
|
| 3+
| 53.35
|
| 21054-2
| Cover only
| each
| 1-2
| 29.95
|
|
| 3+
| 27.95
|
30-Slide Rack, Stainless Steel
Slotted rack is designed to hold 30 microscope slides 3" x 1" (75 x 25mm), 3"
x 1-1/2" (75 x 38mm), and 3" x 2" (75 x 51mm). The rack is made of non-tarnishable
304 stainless steel and is chemical resistant. Handle is permanently attached, but hinged to permit closure
of dish and easy insertion and removal of the microscope slides.
Rack dimensions (LxWxH): 105 x 80 x 25mm (4.13" x 3.15" x 1")
| Prod #
| Description
| Unit
| Qty
| Price
| Order / Quote
|
21072
| 30-Slide Rack, fits #21054
| each
| 1-2
| $44.75
|
|
3+
| 41.50
|
16/32 Slide Rack, Glass
The Glass Rack holds 16 single slides, 31 slides arranged alternately straight across
and diagonally, or 32 slides back-to-back.
| Prod #
| Description
| Unit
| Qty
| Price
| Order / Quote
|
21056
| 16/32 Slide Glass Rack, with handle, fits #21054
| each
| 1-2
| $38.75
|
|
3+
| 36.25
|
20/40 Slide Rack, Glass
Holds 20 single slides or 40 back to back of regular 3" x 1" (75 x 25mm) size,
3" x 1-1/2" (75 x 38mm) and 3" x 2" (75 x 51mm) sizes.
| Prod #
| Description
| Unit
| Qty
| Price
| Order / Quote
|
21057
| 20/40 Slide Glass Rack, with handle, fits #21054
| each
| 1-2
| $52.95
|
|
3+
| 49.75
|
|
 |
Staining Dish
50-Slide Unit, with Cover
Slotted rack holds 50 microscope slides, sizes 3" x 1" (75 x 25mm) as well as
3" x 1-1/2" (75 x 38mm). The unit measures approximately 200 x 83 x 105mm (7.87"
x 3.27" x 4.13") overall.
|
Rack is made of non-tarnishable 304 stainless steel and is resistant to most staining
solutions. The handle is permanently attached, but hinged to permit closure of dish
and easy insertion and removal of the microscope slides. Dish and cover are made of soda lime
glass. Approximate inside dimensions: 70 x 185 x 90mm (2.75" x 4.72" x 3.54").
| Prod #
| Description
| Unit
| Qty
| Price
| Order / Quote
|
21058
| Staining Dish Set (cover, dish & rack)
| each
| 1-5
| $129.60
|
|
6+
| 118.65
|
| 21059
| Staining Dish
| each
| 1-2
| 69.85
|
|
| 3+
| 66.95
|
| 21068
| Staining Dish and Cover
| each
| 1-2
| 99.65
|
|
| 3+
| 94.50
|
| 21069
| 50-slide Stainless Steel Rack w/handle
| each
| 1-2
| 44.95
|
|
| 3+
| 41.15
|
|
 |
10/20 Slide Staining Dish with Cover
For staining 3 x 1" (75 x 25mm) microscope slides. Holds 10 single slides, 19
slides arranged alternately straight across and diagonally, or 20 slides back-to-back.
Made of soda lime glass. Approximate inside dimensions: 77 x 60 x 30mm
(3" x 2-3/8" x 1-3/16").
|
|
| Prod #
| Description
| Unit
| Qty
| Price
| Order / Quote
|
21066
| 10/20 Slide Staining Dish with Cover, set
| each
| 1-5
| $22.95
|
|
6+
| 21.35
|
|
 |
Staining Dish - 20-Slide Unit
This 20-slide unit is the standard for manual staining procedures, holds 10 single slides or 20 back to back. Removable glass slide rack has an open bottom for rapid immersing and draining of stain, eliminating any carryover. The rack holds 20 slides of regular size 3" x 1" (75 x 24mm), 3" x 1-1/2" (75 x 38mm) sizes. Made of soda lime glass. Approximate inside dimensions: 86 L x 68 W x 57mm D (3.4" x 2.63" x 2.25").
|
|
| Prod #
| Description
| Unit
| Qty
| Price
| Order / Quote
|
21043
| Complete Set; dish, cover, rack, handle
| each
| 1-5
| $65.60
|
|
6+
| 61.50
|
| 21044
| Dish only
| each
| 1-2
| 26.85
|
|
| 3+
| 24.50
|
| 21047
| Cover only
| each
| 1-2
| 16.95
|
|
| 3+
| 15.45
|
| 21075
| Dish and Cover, set, (without handle)
| each
| 1-2
| 42.25
|
|
| 3+
| 39.25
|
| 21075-2
| Glass Slide Rack only (without handle)
| each
| 1-2
| 24.95
|
|
| 3+
| 22.95
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
21075-6
| Wire Handle only
| case/6
| $29.95
|
|
|
 |
Vertical Staining Jar with Cover
The wide top makes this jar especially suitable for staining slides inscribed on
one end. Holds 8 single 3 x 1" (75 x 25mm) slides vertically or 16 slides back-to-back.
Made of soda lime glass. Approximate inside dimensions: 90 x 50 x 30mm
(3.5" x 2" x 1.18"). Holds about 50ml of liquid.
|
|
| Prod #
| Description
| Unit
| Qty
| Price
| Order / Quote
|
432-1
| Staining Jar with Cover
| each
| 1-5
| $25.95
|
|
6+
| 23.85
|
|
 |
Hellendahl Type Staining Dish
For staining or use as a TLC developing chamber. Holds 8 individual 3" x 1" (75
x 25mm) slides. If necessary, 16 slides can be accommodated back-to-back. Made of
soda lime glass. Approximate inside dimensions: 75 x 80 x 30mm (3" x 3.14" x 1.18")
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
21074
| Hellendahl Staining Dish
| case/6
| $135.80
|
|
|
 |
Coplin Staining Jar with Glass Cover
A popular staining jar with heavy glass walls and broad base for increased stability.
Holds 5 single 3" x 1" (75 x 25mm) slides vertically or 10 slides back to back.
Requires small reagent volume. Made of soda lime glass. Approximate inside
dimensions: 75 x 30 x 30mm (3" x 1.18" x 1.18").
|
|
| Prod #
| Description
| Unit
| Qty
| Price
| Order / Quote
|
21067
| Coplin Staining Jar with Glass Cover
| each
| 1-5
| $27.95
|
|
6+
| 25.25
|
|
 |
Short Coplin Staining Jar with Plastic Screw Top
Holds 5 single 3" x 1" (75 x 25mm) slides or 10 back to back. Slides extend above
the opening, permitting them to be manipulated without forceps. Screw cap is linerless,
white polypropylene. The white linerless polypropylene Screw cap closure retains
organic solvents and reduces evaporation. Rectangular base. Made of soda
lime glass. Approximate inside dimensions: 65 x 30 x 30mm (2.6" x 1.18" x 1.18").
Holds about 50ml of liquid.
|
|
| Prod #
| Description
| Unit
| Qty
| Price
| Order / Quote
|
431-3
| Short Coplin Staining Jar
| each
| 1-2
| $16.90
|
|
3-11
| 15.25
|
12+
| 14.75
|
|
 |
Tall Coplin Staining Jar with Plastic Screw Top
For staining slides or use as a developing chamber in thin layer chromatography.
Unit holds 5 single 3" x 1" (75 x 25mm) slides vertically or 10 slides back-to-back.
Screw cap is white linerless polypropylene which reduces solvent evaporation. Rectangular
base. Made of soda lime glass. Approximate inside dimensions: 70 x 30 x
30mm (2.75" x 1.18" x 1.18")
|
|
| Prod #
| Description
| Unit
| Qty
| Price
| Order / Quote
|
428-3
| Tall Coplin Staining Jar
| each
| 1-2
| $19.95
|
|
3-11
| 18.35
|
12+
| 17.85
|
|
 |
Plastic Slide Grip
Holds five each 3" x 1" (25 x 75mm) slides and fits Coplin Jars and round-mouthed
staining jars. Molded plastic withstands chemicals used in staining including special
stains and metals. Can be used in temperatures up to 80°C.
|
|
| Prod #
| Description
| Unit
| Qty
| Price
| Order / Quote
|
21048
| Plastic Slide Grip
| each
| 1-5
| $14.95
|
|
6+
| 13.95
|
|
 |
Coplin Staining Jar with Tall Glass Cover
Chamber with extra tall lid accepts five single 3" x 1" (75 x 25mm) and 3.94"
x 1" (100 x 25mm) slides. Made of soda lime glass. Meets USP Type
1 standards.
|
|
| Prod #
| Description
| Unit
| Qty
| Price
| Order / Quote
|
21073
| Coplin Stain Jar with Tall Cover
| each
| 1-5
| $34.75
|
|
6+
| 32.55
|
|
 |
Polypropylene Staining Jar
Tapered, square with flat shallow threaded screw cap. Holds either 5 single or 10 back-to-back standard 3" x 1"
(75 x 25mm) slides in grooves. Loosen lid before autoclaving.
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
21038
| Polypropylene staining Jar
| case/4
| $31.25
|
|
|
 |
Coplin Staining Jar
Polypropylene staining jar holds either 5 single or 10 back-to-back standard 3"
x 1" (75 x 25mm) slides. The interior is grooved to hold the slides in and upright
position. Domed and shallow thread cap provides protection to the slides. Loosen
lid before autoclaving. Sold in package of 4.
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
21029
| Coplin staining Jar, Polypropylene
| case/4
| $15.95
|
|
|
 |
Polypropylene Staining Jar
Microwave Safe
Accommodates 10 slides, 3" x 1" (75 x 25mm), one per slot. Rectangular top,
snap-lock lid, internal grooves. Microwave Safe Jar. Has a vent in the lid.
Remove foam seal when used in a microwave.
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
21046
| Polypropylene Staining Jar, 10 Slides, Microwave Safe
| each
| $24.60
|
|
|
|
|
Polypropylene Staining Jar
Bench Staining
Accommodates 10 slides, 3" x 1" (75 x 25mm), one per slot. Rectangular top,
snap-lock lid, reagent proof seal, internal grooves, Bench Staining Jar.
Has no vent in the lid.
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
21046-1
| Polypropylene Staining Jar, 10 Slides, Bench Staining
| each
| $22.50
|
|
|
 |
Coverglass Staining Jar
Glass jar with ground glass cover, accommodates 8 each back-to-back size 18 x 18mm
coverslips. 45mm high.
|
|
| Prod #
| Description
| Unit
| Qty
| Price
| Order / Quote
|
21036
| Coverglass Staining Jar
| each
| 1-3
| $8.50
|
|
4+
| 7.65
|
|
 |
Columbia Staining Jar for Coverslips
This staining jar can hold up to 4 cover slips measuring 17-23mm wide, and up to
30mm long. Longer coverslips can be accommodated by removing the cap. The jar comes
with a white polypropylene screw cap with a PTFE coated polyethylene liner. It is
manufactured from Wheaton soda lime glass, which meets USP type III standards,
and is resistant to most chemicals.
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
21040
| Columbia Jar for Coverslips
| each
| $32.55
|
|
|
|
|
21092
21092 - 21095
|
PELCO Stain Saver™ Kits
reduce your volume of antibody and consumables to save money
- The unique design delivers significant primary and secondary antibody cost savings (up to 90%)
- Designed to create a capillary gap between 1" x 3" or 2" x 3" slides and any size or shape coverslip for those slides (21092)
- There are two designs: the 21092, T-1 for single antibody staining and the 21095, T-2 designed for staining two tissues with 2 different antibodies on the same slide
- Perfect for microwave or conventional staining protocols
This unique staining device is a breakthrough in cost-savings for immunohistochemistry. For the first time it is possible to create a capillary gap for slides or coverslips using one simple device. There are no expensive consumables, as with other products. The design of the PELCO Stain Saver™ will limit the amount of precious antibody to less than 200ul for a 22 x 22mm (#2 thickness) coverslip-sized area. Total stainable area on a slide or coverslip can be up to 24 x 50mm (21092). |
| Either design will accommodate round or square coverslips. The tissue to be labeled can be on a coverslip or slide because both are employed to create a uniform capillary gap. The unique adhesive properties of the mesas, in the design of the PELCO Stain Saver™, provide adhesion of either Thermanox or glass coverslips to the mesa tops. For conventional immunohistochemistry (overnight or longer incubations) the PELCO® Storage Box serves as an ideal humid chamber (2239-6 holds 1 PELCO Stain Saver™ and the 2239-2 holds 4). Each kit contains a staining pad insert inside a black box (21092-2 Medium Black Plastic Box, styrene. T-1 and 2 kits will accommodate 3 each 1" x 3" or 1 each 2" x 3" slides. The capillary gap with a #2 coverslip is 320µm. |
2249-6 - 2249-2 |
The polypropylene Humid Chambers are a convenient and economical way to create a humid environment for slides, PELCO Stain Saver™ Kits or other slide applications. The chambers are made from sturdy, impact resistant polypropylene with a sealing lid and a polystyrene insert to place slides, PELCO Stain Saver™ Kits or coverslips above the water level. |
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
21092
| PELCO Stain Saver™, T-1 Kit (insert and black box) is designed for any shape or size coverslip for 1"x3" or 2"x3" slides
| each
| $49.50
|
|
| 21095
| PELCO Stain Saver™, T-2 Kit is designed when two tissues are to be stained with two different antibodies, coverslip size 22x22mm or smaller
| each
| 49.50
|
|
| 21092-2
| Replacement PELCO Stain Saver™ Black Box
| each
| 5.60
|
|
| 2249-6
| Polypropylene Humid Chamber, Small. Holds 1 kit, 6"x5.3"x4" (15.2x13.5x10.1cm)
| each
| 22.50
|
|
| 2249-2
| Polypropylene Humid Chamber, Large. Holds 4 kits, 11.6"x9.2"x4" (29.5x23.5x10.1cm)
| each
| 46.50
|
|
|
 |
Disposable Staining Slide Tray Set
Stain, rinse and dry slides on a single working tray. |
Made of polypropylene and polyethylene blend. This rugged staining tray provides a clean, fresh working surface for up to eight slides. Base has a deep well which holds 38ml of liquid. Top grip on lid, recessed handles on base along with two pour spouts on base, facilitate transport and waste removal. The dark color of the base and lid make it ideal for light sensitive luminescent and UV applications. Set includes 4 bases and 1 lid.
- Economical alternative to metal trays
- Single use avoids cross-contamination
- Sturdy, yet light weight and compact
- 305mm x 127mm x 29.5mm (12" x 5" x 1-5/32")
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
21052
| Disposable Staining Slide Tray Set, 4 bases and 1 lid
| set
| $30.50
|
|
 |
Microwave-assisted Immunostaining on Glass Slides
using the Sequenza™ Slide Rack and Coverplate™ system
|
The Sequenza™ Slide Rack, holding 10 glass slides and Coverplates™, is a system
designed for the immunolabeling of sections on glass slides. While originally
designed for bench techniques, this system is uniquely suited for microwave-assisted
applications. The Slide Rack holds glass slides with a Coverplate™. This combination
forms a capillary gap between the slide and the plate. Reagent volumes, especially
antibody, are greatly reduced using this versatile system. A reagent hopper forms
the uppermost part of the plastic Coverplate™ allowing for easy dispensing of
reagent into the capillary gap. Using a PELCO® Microwave Processor with a PELCO ColdSpot®,
rapid immunostaining of sections on glass slides is reliable and easy. Go to the Immunolabeling Application Kit for the PELCO BioWave® Pro.
|
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
36105
| Sequenza™ Slide Rack
| each
| $541.70
|
|
| 36107
| Coverplate™ Assemblies
| pkg/25
| 138.25
|
|
|
|
Immunostain Moisture Chamber
This is a low-cost, high precision moisture chamber for ten slides. Every moisture
chamber is divided into ten individual compartments with approximately 12.7mm (1/2")
empty space between the compartments. When the chamber lid is closed, eight barrier
dividers are placed into the empty spaces between the microscope slide compartments
completely isolating all compartments. This is a very desirable feature when doing
immunostaining.
The microscope slides are placed on four pedestal posts and four corner posts each
11.5mm (0.460") high, thus raising the surface of the slides approximately 12.7mm
(1/2") off the floor to keep the slides away from the water below and making
the slides easily retrievable (either by hand or by forcep).
The chamber is fabricated out of heavy-duty polystyrene with an air-tight design
to keep moisture in. The chamber is designed to be stackable in order to save counter
and/or refrigerator space
Available in both clear and black.
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
21049
| Moisture Chamber, clear
| each
| $65.55
|
|
| 21049-B
| Moisture Chamber, black
| each
| 71.50
|
|
|
StainTray™ Slide Staining System
|
StainTray™ Slide Staining System for up to 20 slides
shown with Clear Lid, optional
|
SlideTray™ Slide Staining System
for up to 10 slides
shown with Clear Lid, optional
|
The StainTray™ is a versatile staining chamber for immunohistochemistry, routine
and light-sensitive stains. The unique design allows water to be added in order to create
a stable humidity chamber. The chamber may also be left empty and act as a waste reservoir
during solution changes. There is a convenient drain plug for easy emptying of the base tray.
Both the black base and black lid offer a light-safe environment for any light-sensitive stains.
|
|
The StainTray™ base is constructed of sturdy ABS plastic and contains 4 plastic rails,
each with a silicone strip to ensure your slides adhere securely in the tray. The rails are
raised to prevent interference from the water or waste in the reservoir and to make the slides
easier to retrieve. The four rubber feet give greater stability to the base during staining.
The units are stackable for more convenient storage. The StainTray™ offers multiple
staining options that can be ideal for histology as well as hematology, cytology and microbiology
laboratories.
- Secure slides with convenient silicone strip
- Black lid for light sensitive stains
- Optional clear lid available for routine staining visibility
- Multi-use tray as humidity chamber or waste reservoir
- Stackable for convenient storage
- Safe for use with cleaning agents except acetone
- Available in 10 slide and 20 slide capacity
- Dimensions 38 x 24 x 4.5cm H (15" x 9-3/8" x 1-3/4" H)
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
21050
| StainTray™, 20 slide w/Black Lid
| each
| $182.35
|
|
| 21050-C
| StainTray™, 20 slide, Clear Lid ONLY
| each
| 63.50
|
|
| 21051
| StainTray™, 10 slide w/Black Lid
| each
| 156.85
|
|
| 21051-C
| StainTray™, 10 slide, Clear Lid ONLY
| each
| 47.95
|
|
|
Citifluor Antifadent Solutions
|
|
|
|
The use of fluorescent labels and markers is now widespread and immuno-fluorescence,
which relies on the use of antibodies tagged with labels such as fluorescein, is a
well-established technique.
A common problem associated with the microscopical examination of these materials
is that the illumination used for stimulating the fluorescence also causes degradation
of the label and this causes fading of fluorescence. This also is a problem when trying
to visualize materials having a low level of labeling. The photofading of labeled
materials can be retarded by the use of the Citifluor mountants.
Antifadent (AF) Solutions
The antifadent solutions AF-1,
AF-2 and AF-3 were specifically developed for use with FITC polyclonal antibodies
but their use is now far more widespread. They show improved signal preservation
with many other fluorochromes including rhodamines and DAPI. AF4 contains the
antifadent propyl gallate, which is particularly suitable for use with DAPI and
Alexa dye-stained materials, as well as FITC-labelled materials.
AF-1 - Glycerol-phosphate buffered solution containing antifadent
for use with labeled tissue and dead cells. Available in two sizes.
|
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| Citifluor Antifadent (AF) Solutions
|
19470
| AF-1, Glycerol-phosphate buffered solution, containing antifadent for use with labelled tissue sections and dead cells, 25ml
| each
| $76.50
|
|
| 19470-1
| AF-1, Glycerol-phosphate buffered solution, containing antifadent for use with labelled tissue sections and dead cells, 100ml
| each
| 198.00
|
|
| I - MSDS
|
| 19472
| AF-2, Glycerol solution containing antifadent for use with labelled tissue sections and dead cells, 25ml
| each
| 76.50
|
|
| 19472-1
| AF-2, Glycerol solution containing antifadent for use with labelled tissue sections and dead cells, 100ml
| each
| 198.00
|
|
I - MSDS (pdf 109K)
Glycerol solution, additives.
|
| 19474
| AF-3, Phosphate-buffered saline solution containing antifadent for examination of whole live cells, 25ml
| each
| 76.50
|
|
| 19474-1
| AF-3, Phosphate-buffered saline solution containing antifadent for examination of whole live cells, 100ml
| each
| 198.00
|
|
| I - MSDS(pdf 108K)
|
| 19476-A
| Citifluor non-fluorescent Immersion Oil, AFB7, 10ml
| each
| 68.50
|
|
| 19476
| AF-4, Glycerol solution containing n-propyl gallate for use with labelled tissue sections and dead cells, 10ml
| each
| 76.50
|
|
| I - MSDS(pdf 107K)
|
| 19490
| AF-100, Phosphate-buffered saline solution containing antifadent specially prepared for use with UVM23 solution where fluorochrome fading is a problem, 5ml
| each
| 15.20
|
|
| I - MSDS (pdf 109K)
|
| 19491
| AF-200, Glycerol solution containing antifadent, specially prepared for use with UVM2 solution where DAPI is the staining material. The solutions can also be used with other fluorochromes such as fluorescein, Alexa dyes and Hoescht dye, 10ml
| each
| 68.50
|
|
| I - MSDS (pdf 108K)
|
| 19492
| AF-300, Glycerol solution containing antifadent, specially prepared for use with UVM2 solution where DAPI is the staining material. The solutions can also be used where fluorescein is the staining material. The solution can also be used with other fluorochromes such as rhodamines, etc., 10ml
| each
| 68.50
|
|
| I - MSDS (pdf 109K)
|
| 19493
| CFM1, Glycerol-PBS ref. index similar to glass, 10ml
| each
| 45.50
|
|
| I - MSDS (pdf 109K)
|
| 19494
| CFM1, Glycerol-PBS w/AF, ref. index similar to glass, 10ml
| each
| 52.70
|
|
| I - MSDS (pdf 135K)
|
| 19495
| CFM2, Glycerol-TRIS buffer, ref. index similar to glass, 10ml
| each
| 45.50
|
|
| I - MSDS (pdf 110K)
|
| 19496
| CFM3, Glycerol-Phosphate & AF, ref. index similar to glass, 10ml
| each
| 59.50
|
|
| I - MSDS (pdf 109K)
|
| UV Mount Media (UVM)
|
| 19497
| UVM1, Methacrylate based solution, UV curable, gives clear film, 10ml
| each
| 45.50
|
|
| I - MSDS (pdf 69K)
|
| 19498
| UVM2, Methacrylate based solution, contains anti-bleaching agent, 10ml
| each
| 45.50
|
|
| I - MSDS (pdf 90K)
|
| 19499
| UVM3, High refractive index methacrylate-based solution designed to be used with AF-100 where fluorochrome fading is a problem, 10ml
| each
| 62.35
|
|
| I - MSDS (pdf 68K)
|
| Solid Mountants
|
| 19469
| Citifluor Solid Mountant Kit is comprised of PVA solution, 25ml and Citifluor antifident in buffer, 5ml. The components can be mixed as required, applied to the specimen and allowed to dry to give a clear film, 30ml
| each
| 95.00
|
|
| I
|
U
Contains anti-fading solution. Suitable for preventing fading of dyes such as DAPI which have the tendency to disperse in glycerol based mounting solutions.
Colloidal Adhesives: See "Adhesives"
|
|
Color coded Capinserts™
Bottom view
|
LockMailer™ - Microscope Mailer and Staining Jar
The LockMailer™ is a tamper proof multi purpose compact container for transporting,
storing, mailing or staining microscope slides. It is constructed of extra-strong
and clear polypropylene and will hold up to 4 standard 1x3" or 25x75mm slides
vertically. The inside slotted channels will keep the slide safely separated. It
incorporates a unique tamper evident leakproof screw cap made of HD polyethylene.
The tamper evident screw cap avoids manipulation of slides without your knowledge.
The LockMailer™ can also be used without the tamper proof feature. The caps on the
Lockmailer™ can be color coded with the optional Capinserts™, available in different
colors: blue, gray, green, lilac and orange. The Capinsert™ is inserted in the
top of the cap and has a write frosted area for sample identification.
The LockMailer™ is also an efficient staining vessel: the unique design has a reduced
internal volume to decrease the amount of staining solutions needed; 14ml w/o slides.
Only 12ml for 1 slide, 10ml for 2 slides, 8ml for 3 slides and 6ml for 1 slide of
the staining solution is needed.
 |
 |
 |
 |
 |
|
Push up the attached tab on side of vial.
|
Make sure it firmly clicks in place.
|
Screw on tamper proof cap all the way.
|
When opening the vial, the tamper evident ring will detach itself from the cap.
|
The LockMailer can also be used without the tamper evident feature.
|
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
21096
| LockMailer Microscope Mailer and Staining Jar, without Capinserts
| pkg/100
| $31.35
|
|
| 21096-10
| Capinserts for LockMailer, blue
| pkg/100
| 2.65
|
|
| 21096-20
| Capinserts for LockMailer, gray
| pkg/100
| 2.65
|
|
| 21096-30
| Capinserts for LockMailer, green
| pkg/100
| 2.65
|
|
| 21096-40
| Capinserts for LockMailer, lilac
| pkg/100
| 2.65
|
|
| 21096-50
| Capinserts for LockMailer, orange
| pkg/100
| 2.65
|
|
|
|
Slide Staining and Storage System
stain, file and store
Universal slide rack and container for autoradiography gel staining and staining techniques.
Molded of black polyoxymethylene-poly-acetal plastic which has great advantages over glass
in all cytological and histological laboratories.
|
The rack and dish are easy to clean and resistant to chemicals used in staining procedures.
Slide Rack
The slide rack has an open bottom for rapid draining. It holds 25 x 15mm (1"
x 3") slides in slots numbered 1 to 25. The handle folds flat on either side.
Four of these racks fit into the Slide Storage Box (see below). Maximum use temperature
85°C (185°F).
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
21078
| Slide Rack, holds 25
| pkg/2
| $36.75
|
|
Staining Dish
The 94 x 81 x 49mm high (3.7" x 3.2" x 1.9") staining dish has a light
tight lid, essential to easily evaporated baths and a compartment for a drying agent.
The dish accommodates 1 Slide Rack Prod. No. 21078, not included. The perforated
slide partition which supports the drying agent has index numbers and a writing surface.
A removable clip is placed on the top edge of the dish, permitting the stain solution
to drain back into the reservoir from the tilted rack. The actual capacity of the
small dish is 250ml but only 150ml is needed, which provides a savings on staining
liquids, developing fluids and intermediates. Made from black polyoxymethylene-poly-acetal-plastic,
the dish is easy to clean and especially suited to store enzymes. The cover will
not jam in freezer storage.
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
21078-1
| Staining Dish with Lid for slide rack No. 21078
| each
| $52.65
|
|
Storage Box
A black polystyrene storage box (not for staining) holds four Slide Racks
(Prod. No. 21078 above), not included. Provides convenient, indexed storage for the slide racks. There is a paper index for each of the four racks inside the cover that marks each section numerically 1 to 25. The box measures 19 x 17 x 3.8cm high (7-1/2" x 6-5/8" x 1-1/2").
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
21078-2
| Storage Box, for 4 slide racks (No. 21078) not included
| each
| $116.85
|
|
|