PELCO® Single End and Double End, Tapered,
Flat Embedding Molds

PELCO® Flat Embedding Mold

Alphanumeric self-impression cavities, pretrimmed end, blue silicone rubber.

Design: R.F. Bils
Number of Cavities: 24
Numbering: A1- A6, B1-B6, C1-C6, D1-D6
Special Cavities: 2 troughs - 1 x 3cm x 3mm deep
1 trough - 1 x 1.7cm x 3mm deep
Mold Size: 105 x 70 x 7mm thick

Prod #	Description	Unit	Qty	Price	Order / Quote
105	PELCO® Flat Embedding Mold	each	1-9	$11.45	Qty:
			10+	10.31

Technical Tip:
All PELCO Silicone Rubber Molds are made from the highest quality silicone rubber available. With care they will last a long time. After polymerization in a 60° C oven, let molds cool before removing blocks. This precaution will increase the lifespan of the mold. Using silicone rubber with Spurr's Resin will significantly reduce the lifespan of the molds.

Alphanumeric self-impression cavities, pretrimmed end, clear silicone rubber.

Design: R.F. Bils
Number of Cavities: 24
Numbering: A1- A6, B1-B6, C1-C6, D1-D6
Special Cavities: 2 troughs - 10 x 39mm x 3mm deep
1 trough - 1 x 1.7cm x 3mm deep
Mold Size: 105 x 70 x 7mm thick

Prod #	Description	Unit	Price	Order / Quote
10504	PELCO® Translucent Flat Embedding Mold	each	$10.75	Qty:

Small Flat Embedding Mold

No numbering, blue color.

Number of cavities: 12
Mold Size: 80 x 45 x 7mm thick

Prod #	Description	Unit	Price	Order / Quote
106	PELCO® Small Flat Embedding Mold	each	$8.25	Qty:

110 Flat Embedding Mold

Consecutive numbering, pretrimmed end, blue silicone rubber.

Number of Cavities: 20
Numbering: 1-20
Mold Size: 89 x 76 x 7mm thick

back up

Prod #	Description	Unit	Price	Order / Quote
110	PELCO® 20 Cavity Embedding Mold	each	$10.50	Qty:

21 Cavity EM Embedding Mold

Single pretrimmed end with consecutive numbering. Blue silicone rubber.

Number of Cavities: 21
Numbering: 1-21
Mold Size: 74 x 61 x 6mm thick

Prod #	Description	Unit	Price	Order / Quote
10505	21 Cavity EM Embedding Mold	each	$7.80	Qty:

Double-end Tapered Embedding Mold

Pretrimmed double ends for each cavity, doubling specimen capacity. Consecutive numbering, blue silicone rubber.

Number of Cavities: 24
Numbering: 1-24
Mold Size: 67 x 85 x 7mm thick

Prod #	Description	Unit	Price	Order / Quote
10535	PELCO® Double-end Mold	each	$9.85	Qty:

10590 Double End Mold

Double pretrimmed ends, consecutive numbering, blue silicone rubber.

Number of Cavities: 21
Numbering: 1-21
Mold Size: 72 x 62 x 6mm thick

Prod #	Description	Unit	Price	Order / Quote
10590	Double End Mold	each	$6.75	Qty: