in 

Histology Supplies
Brain Matrices
Ideal Micro-Drill™ and Burrs

Dissection Tools

single edge, carbon steel blade
Blades

micro probes

Needles, Probes and Picks

dissection kit
Dissection Kit
and Suture Removal Kit
scalpel set stainless steel scalpel blades for No. 3 Handles
Scalpels
Forceps, Hemostat, Hartman Artery
Forceps - Hemostat
medium dissecting forceps

aesculap dissecting forceps

Forceps - Dissecting Forceps
Grossing and Trimming Tools
curved tip tweezer

PELCO Reverse Tweezers, Flat

Tweezers
replaceable blade scissors
Scissors - Replaceable Blade
ligature scissors
Scissors - Highest Quality, Aesculap®
surgical scissors
Scissors - High Quality
dissecting scissors
Scissors - General Lab

micro spoon/spatula

micro spoon/spatula

micro spoon/spatula


Spatulas and Spoons (Micro)
muller micro scissors
Scissors - Micro
Tongs, PTFE Coated
tissue mincing dish for specimen preparation trimming board
Dissecting and Trimming Boards
Mincing Dish
  Oscillating Autopsy Saw, oscillationg laboratory saw
Blade for Oscillation Autopsy Saw
Oscillating Autopsy Saw
Extra Fine Bone Saw

Extra Fine Bone Saw

Surgical Loups

Surgical Loupes



orangewood sticks

Applicator Sticks, Wooden Picks, Bamboo Splints, Cotton Swabs
shur sharp microtome blades
Shur-Sharp Microtome Blades

Blades

back to Consumables for Vibratory Tissue Slicers
go to Brain Matrices

Carbon Steel Blades (AISI 1095)
GEM® Single Edge
GEM® Single Edge, Pop Up Dispenser
GEM® Single Edge in Dispenser
PAL® Single Edge, Blue, 3-Facet
Single Edge, No Notch
WECPREP™ Blades
Single Edge, Long
Feather®, Double edge
Single Edge for Brain Matrices
Stainless Steel Blades (AISI 440)
GEM® Single Edge
GEM® Single Edge, Pop Up Dispenser
Personna® Surgical Prep Blades
Ultra-Thin Blades
Single Edge, PTFE Coated
Double Edge, PTFE Coated
Injector Style, PTFE-Coated
Microtome Blades for Sectioning
Tissue-Tek®, Accu-Edge® Blades
DuraEdge® Blades
Double Edge, PTFE Coated
Shur/Sharp™ Microtome Blades
Sapphire Knives, for Vibratory Tissue Slicers
Tungsten Carbide Knives, for hard samples
Feather®, Double edge
Saftey Holders
Trim-Safe


measurement schematic
  3 facet edge is sharper and gives more precise cutting.   2 facet edge profile is most durable and gives a good balance between sharpness and lifetime.





Single Edge, Carbon Steel GEM® Blades

single edge, carbon steel blade

Best quality 3 facet blade, single edge, aluminum back. Individually protected, 2 boxes of 100 each.
• Length: 38.9mm (1.53")
• Cutting Edge Length: 38.8mm (1.527")
• Width: 19.6mm (0.77")
• Thickness: 0.229mm (0.009")

Prod # Description Unit Price Order / Quote
121-1 Carbon Steel GEM® Blades, box/200 each $17.50
Qty:





Single Edge, Carbon Steel GEM® Blades in Pop-Up Dispenser

single edge, carbon steel blade

Same as 121-1 above but in a handy plastic dispenser box of 100 blades. Push down on blue tab and a new blade pops up. Store used blades in rear slot for safe disposal.
• Length: 38.9mm (1.53")
• Cutting Edge Length: 38.8mm (1.527")
• Width: 19.6mm (0.77")
• Thickness: 0.229mm (0.009")

Prod # Description Unit Price Order / Quote
121-111 Carbon Steel GEM® Blades in Pop-Up Dispenser of 100 each $14.75
Qty:





Single Edge, Stainless Steel Uncoated GEM® Blades

single edge, stainless steel razor blade Uncoated, 3 facet stainless steel, aluminum back, single edge. Individually protected. 2 boxes of 100 each.
• Length: 38.9mm (1.53")
• Cutting Edge Length: 38.8mm (1.527")
• Width: 19.8mm (0.78")
• Thickness: 0.229mm (0.009")

Prod # Description Unit Price Order / Quote
121-2 Single Edge, Stainless Steel Uncoated GEM® Blades, box/200 each $27.50
Qty:





GEM® Blades, Single Edge, Carbon Steel

single edge, carbon steel, gem star razor blades Top quality, single edge, 3 facet, GEM® carbon steel blades, aluminum back, in 10 blade safety dispensers, pack of 10 dispensers. Used blades can be stored in bottom part of dispenser for safe disposal.
• Length: 39.6mm (1.56")
• Cutting Edge Length: 38.9mm (1.53")
• Width: 19.6mm (0.77")
• Thickness: 0.229mm (0.009")

Prod # Description Unit Price Order / Quote
121-82 GEM® Dispenser Blades, in 10 blade dispensers, pkg/12 dispensers (120 blades) each $18.75
Qty:





GEM® Single Edge, Stainless Steel Blades


Uncoated stainless steel, steel back, single edge blades in 10 blade safety dispensers, pack of 5 dispensers. The GEM blades have a 3-facet edge with a steel back, and are degreased for clean room applications. Used blades can be stored in bottom part of dispenser for safe disposal. Both blade and back are made from low carbon 400 series stainless steel. The hardness range of the blade is 56-63 Rockwell "C".
• Length: 39.6mm (1.56")
• Cutting Edge Length: 39.6mm (1.56")
• Width: 19.6mm (0.77")
• Thickness: 0.229mm (0.009")

Prod # Description Unit Price Order / Quote
121-22 Single Edge, Stainless Steel Dispenser Blades, in 10 blade dispensers, pkg/5 dispensers (50 blades) each $16.25
Qty:





GEM® Single Edge, Stainless Steel Blades in Pop-Up Dispenser

Single Edge, Stainless Steel Blades in Pop Up Dispenser

Same as 121-22 above but in a handy plastic dispenser box of 100 blades. Push down on blue tab and a new blade pops up. Store used blades in rear slot for safe disposal.
• Length: 39.6mm (1.56")
• Cutting Edge Length: 39.6mm (1.56")
• Width: 19.6mm (0.77")
• Thickness: 0.229mm (0.009")

Prod # Description Unit Price Order / Quote
121-122 GEM® Single Edge, Stainless Steel Dispenser Blades in Pop-Up Dispenser of 100 each $28.75
Qty:





Single Edge, PTFE-Coated Blades

single edge ptfe coated razor blades
ptfe coated razor blades

Cuts through epoxies nicely. Stainless steel single edge, 3 facet, PTFE-coated stainless steel GEM® blades. Individually protected, 2 boxes of 100 each.
• Length: 39.6mm (1.56")
• Cutting Edge Length: 38.8mm (1.527")
• Width: 19.6mm (0.77")
• Thickness: 0.229mm (0.009")

Prod # Description Unit Price Order / Quote
121-3 Single Edge, PTFE- Coated, Stainless Steel Blades, box/200 each $34.95
Qty:





Single Edge, Blue 3-Facet PAL® Blades

single edge blue PAL razor blades
single edge blue PAL razor blades

Single edge, blued carbon steel, 3 faceted PAL® blade with aluminum back, individually protected. Box of 100.
• Length: 39.6mm (1.56")
• Cutting Edge Length: 38.8mm (1.527")
• Width: 19.3mm (0.76")
• Thickness: 0.23mm (0.009")

Prod # Description Unit Price Order / Quote
121-20 Single Edge, Blue Carbon Steel, PAL® blades, box/100 each $8.95
Qty:





Single Edge, No Notch Carbon Steel Blades

single edge, no notch carbon steel blades Quality, standard duty, single edge, steel back, no notch, carbon steel blades. Individually protected, 2 boxes of 100
• Length: 39.6mm (1.56")
• Cutting Edge Length: 38.8mm (1.53")
• Width: 19.6mm (0.77")
• Thickness: 0.229mm (0.009")

Prod # Description Unit Price Order / Quote
121-12 Single Edge, No Notch, Carbon Steel Blades, box/200 each $12.70
Qty:





WECPREP™ Blades

wecprep blades Single edge, stainless steel, surgically sharp. Sturdy, long and effective cutting blade.
Packaged 10 small boxes of 5 blades each in larger box.
• Length: 57.4mm (2.26")
• Cutting Edge Length: 55.9mm (2.20")
• Width: 13.4mm (0.528")
• Thickness: 0.279mm (0.011")

Prod # Description Unit Price Order / Quote
121-10 WECPREP™ Blades, box/50 each $85.75
Qty:





Personna, Stainless Steel Surgical Prep Blades Personna® single edge, stainless steel, surgically sharp blade. Smooth, long and reliable blade.
Packaged 10 small boxes of 5 blades each in larger box.
• Length: 56.8mm (2.24")
• Cutting Edge Length: 54.8mm (2.16")
• Width: 13.3mm (0.523")
• Thickness: 0.228mm (0.009")

Prod # Description Unit Price Order / Quote
121-13 Personna®, Stainless Steel Surgical Prep Blades, box/50 each $33.95
Qty:





Single Edge, Long Carbon Steel Blades

single edge carbon steel blades High quality, single edge, long carbon steel blades for extra cutting width. Individually protected, box of 250.
• Length: 57.4mm (2.26")
• Cutting Edge Length: 54.9mm (2.16")
• Width: 13.3mm (0.524")
• Thickness: 0.229mm (0.009")

Prod # Description Unit Price Order / Quote
121-15 Single Edge, Long, Carbon Steel Blades, box/250 each $112.50
Qty:





Trim-Safe

Trim-Safe razor blade holder Protects your fingers while cutting and trimming with single edge razor blades. Accommodates all types of single edge razor blades we offer. The blade sits in a shallow groove and can slide side-ways. It is held in place by finger pressure. Maximum blade size is 60mm W x 20mm H (2.36" W x 0.75" H) and cutting opening is 20mm (0.75") wide.

Prod # Description Unit Price Order / Quote
81117 Trim-Safe each $9.65
Qty:
81117-1 Trim-Safe pkg/12 80.00
Qty:





Feather® Blades

feather razor blades Carbon steel; sharp edges. Break in half lengthwise for use (protect fingers and use eye protection). This is the preferred cutting blade for use with the PELCO easiSlicer™. Ideally suited for use with Microslicer™, Vibratome® and other vibratory slicers.
• Length: 42.8mm (1.685")
• Cutting Edge Length: 36mm (1.42")
• Width: 22mm (0.865")
• Thickness: 0.127mm (0.0045")

Prod # Description Unit Price Order / Quote
121-9 Feather®, Double Edge Carbon Steel Blades, box of 10 each $8.95
Qty:





Ultra-Thin Blade

ultra-thin, single edge blade Single edge, stainless steel blade. Ultra-thin, sharp edge blade with a cutting tip angle of 22° for use in vibratory slicers such as Microslicer™, Vibratome® and others. Sold in a pack of 100.
• Length: 39.9mm (1.55")
• Cutting Edge Length: 39.9mm (1.55")
• Width: 9mm (0.35")
• Thickness: 0.076mm (0.003")

Prod # Description Unit Price Order / Quote
121-19 Ultra-Thin Blade, Single Edge, box of 100 each $112.50
Qty:





Double Edge, Breakable Style Cutting Blades

double edge, PTFE coated razor blades PTFE-treated stainless steel, individually wrapped and bulk packed. Lightly oiled to prevent corrosion. Suitable blade for PELCO easiSlicer™, Microslicer™, Vibratome® and other brands of vibratory microtomes.
• Length: 42.9mm (1.69")
• Cutting Edge Length: 37.1mm (1.46")
• Width: 21.7mm (0.855")
• Thickness: 0.11mm (0.004")

Prod # Description Unit Price Order / Quote
121-6 Double Edge Stainless Steel Cutting Blades, box of 250 each $39.50
Qty:





Blade Safe

Feather® Blades Safely store up to 100 used blades for disposal. Discard when full.

  • Length: 69.85mm (2.75")
  • Width: 50.8mm (2")
  • Height: 38.1mm (1.5")
  • Blade Slot Length: 60.325mm (2.375")

Prod # Description Unit Price Order / Quote
121-25 Blade Safe pkg/4 $12.50
Qty:





Injector Style, Stainless Steel, PTFE-Coated Blades

PTFE coated, stainless steel, injector razor blades Useful for PELCO easiSlicer™, Microslicer™, Vibratome® and other vibratory microtomes.Single edge, 20 per dispenser.
• Length: 38.1mm (1.5")
• Cutting Edge Length: 36.3mm (1.43")
• Width: 8mm (0.314")
• Thickness: 0.25mm (0.010")

Prod # Description Unit Price Order / Quote
121-4 Injector Blades, 20 blades in dispenser each $4.90
Qty:





Tissue-Tek® Accu-Edge®High and Low Profile Disposable Blades

accu-edge microtome blades
  • Reliably sharp, uniformly consistent
  • Ultrasharp edges with PTFE resin coating
  • Obtain acceptable ribbons sooner
  • Increase quality sections
  • Low profile for sections less than 3µm
  • High profile for tough material and sections over 3µm

For Sale in U.S.A. Only

Prod # Description Unit Price Order / Quote
For Sale in U.S.A. Only
27235 Accu-Edge® 4689 Low Profile Blades, Dispenser of 50 blades, 80Lx8.31Wx0.26mmT (3.15"Lx0.327"Wx0.01"T) each $121.50
Qty:
27236 Tissue-Tek® Feather® 4980 Low Profile Blades, Dispenser of 50 blades, 80Lx8Wx0.24mmT (3.15"Lx0.315"Wx0.009"T) each 230.35
Qty:
27237 Accu-Edge® 4685 High Profile Blades, Dispenser of 50 blades, 75.7Lx14Wx0.31mmT (2.98"Lx0.55"Wx0.012"T) each 119.80
Qty:

 


 

DuraEdge™ Low Profile Disposable Microtome Blades

DuraEdge 7223 Lowprofile Microtome Blades New triple facet blades offer superior cutting edge and durability. Quality stainless steel with three angled facets for the ultimate blade sharpness. Uniform PTFE coating reduces friction, eliminate striations, and compression. Requires no break-in period.

Prod # Description Unit Price Order / Quote
27238 DuraEdge™ 7223 Low Profile Disposable Microtome Blades, PTFE coated, 77Lx8Wx.3mmT (3"Lx.315"Wx.012"T), Dispenser of 50 blades each $106.50
Qty:





DuraEdge™ High Profile Disposable Microtome Blades

duraedge microtome blades

PTFE coated, High Profile blades

  • High quality hardened stainless steel finely honed and polished for flaw-free edge.
  • Special proprietary process ensures edge quality and promotes durability.
  • Uniform PTFE coating reduces friction, eliminates striations and compressions, and requires no break-in period.

Economy High Profile blades
Ceramic coated, eliminating edge corrosion and enhancing product life.

Prod # Description Unit Price Order / Quote
27241 DuraEdge™ 7310 High Profile Disposable Microtome Blades, PTFE coated, 77Lx14Wx0.3mmT (3"Lx0.55"Wx0.012"T), Dispenser of 50 blades each $106.50
Qty:
27243 DuraEdge™ 7203 High Profile Disposable Microtome Blades, ceramic coated, economy blades, 77Lx14Wx0.3mmT (3"Lx0.55"Wx0.012"T), Dispenser of 50 blades each 104.60
Qty:





Shur/Sharp™ Disposable Microtome Blades

shur sharp microtome blades 
back to Histology Supplies

PTFE coated, Low or High Profile blades

Choose from these three disposable microtome blades to meet all your sectioning needs: Standard Low Profile blades for routine thin tissue samples; High Profile blades for thicker sections; and Heavy Duty for difficult-to-section samples like uterus.

Prod # Description Unit Price Order / Quote
27230 Standard Low Profile Disposable Microtome Blades, PTFE coated, 76Lx7.93Wx0.3mmT (3"Lx0.312"Wx0.012"T), dispenser of 50 blades each $139.75
Qty:
27231 High Profile Disposable Microtome Blades, PTFE coated, 76Lx14.05Wx0.3mmT (3"Lx0.553"Wx0.012"T), dispenser of 50 blades each 139.75
Qty:

Heavy Duty Blades for Cryostats

Prod # Description Unit Price Order / Quote
27232 Heavy Duty Disposable Microtome Blades, 76.2Lx12.6Wx0.52mmT (3"Lx0.498"Wx0.02"T), dispenser of 35 blades each $180.70
Qty:





Blades for use with Brain Matrices

brain matrix blades
Single edge uncoated carbon steel.
This single edge thin, extra long razor blade is made from uncoated carbon steel. The blade is 120mm long, 20mm wide and 0.12mm thick (4.72 x 0.78 x 0.005"). It is double beveled for increased strength and durability. Each blade is individually protected and lightly oiled for corrosion protection. Recommend cleaning with Isopropanol (product 18242) before use. This razor blade is developed specifically for large brain matrices.

Prod # Description Unit Price Order / Quote
121-96 PELCO® Blades for use with Brain Matrices, pkg/25 each $56.25
Qty:





brain matrix blades
Single edge uncoated carbon steel.
118mm long x 19mm wide x 0.229mm thick. (4.65 x 0.75 x 0.009"). Single edge carbon steel.

Prod # Description Unit Price Order / Quote
121-95 Blades for use with Brain Matrices, pkg/25 each $77.90
Qty:

go to Brain Matrices






Sapphire Knife

Sapphire Knife

Sapphire, while not as hard as tungsten carbide or diamond, is still hundreds of times harder than steel razor blades. The hardness provides durability and sharpness. With proper care, one blade can accomodate a large number of sections.

Specifications

Material: synthetic single crystal sapphire
Edge Length: 1.5" (40mm)
Blade Height: 0.5" (12mm)
Blade Thickness: 0.035" (0.9mm)

Prod # Description Unit Price Order / Quote
121-18 Sapphire Knife each $175.00
Qty:

PELCO® Technical Notes, Sapphire Knife 1.5" (40mm) L (PDF File)

Other Blades for Vibratory Tissue Slicers go to Sapphire Blades