in 


back to Desiccators, Desiccant Overview
back to Ovens Overview

PELCO® Mini Hot Vac Vacuum Desiccator

Vacuum and heat; functions as a desiccator or mini-drying station

Hot Vacuum Desiccator - Drying Station

An efficient way to warm embedding plastics while removing gas bubbles. The aluminum base is placed on a laboratory heating plate (optional). A vacuum can be drawn through a provided porthole in the baseplate using an optional vacuum pump. A digital thermometer (included) measures the plate temperature. Can be used up to 120°C (248°F). Bell jar made out of soda lime glass, Silicone o-ring seal. Vacuum gauge (showing inches of mercury), 3-way valve with filtered vent with a 1/2" Hose Connection (standard) to connect vacuum systems with a 1/2" ID vacuum hose. A 3/8" Hose Connection is also included for 3/8" or 1/4" ID hose.

What a practical and effective way to cure embedments or dry samples while degassing them!
Inside dimensions are 6" Dia. x 3" H (15.3 x 7.6cm)
Vacuum Pump Kits for #2245 Vacuum Dessicator
P40-H Hot Plate


Prod # Description Unit Price Order / Quote
2245 PELCO® Mini Hot Vac Vacuum Desiccator each $870.25
Qty:
2245-1 PELCO® Mini Hot Vac Vacuum Desiccator Replacement Silicone O-Ring each 12.00
Qty:




VRI-2 Rotary Pump Kit 55 for #2245 Vacuum Dessicator

This pumping kit consist of the VRI-2 pump with a KF16 hose adapter, 1/4” thick wall silicone hose and rotary pump exhaust filter and KF16 adapter. The achievable vacuum is in the 10-2 mbar range. Very cost effective solution offering fast pumping speed and good end vacuum. Ideally used for intermittent pumping. Available both in 115V and 230V.
891-31 - SDS (PDF 93KB)

Prod # Description Unit Price Order / Quote
92092-55 VRI-2 Pump Kit for Round Vacuum Desiccators, 115V each $595.00
Qty:
92092-55-230 VRI-2 Pump Kit for Round Vacuum Desiccators, 230V each 595.00
Qty:
891-31 PELCO® Ultra 19 Vacuum Pump Oil, 1 liter each 13.25
Qty:
9609 Exhaust Filter for VRI-2 Pump each 69.70
Qty:


3436 Diaphragm Pump Kit for #2245 Vacuum Dessicator

This dry pumping kit consists of the #3436 diaphragm pump with 3 feet of 1/4” thick wall silicon hose. This is a cost effective solution suitable for moderate vacuum requirements. Achievable vacuum is in the 200 mbar range. For higher vacuum levels, a two stage rotary pump would be more suitable. Available both in 115V and 230V.

Prod # Description Unit Price Order / Quote
3436-51 Diaphragm Pump Kit for Round Vacuum Desiccators, 115V each $709.00
Qty:
3436-51-230 Diaphragm Pump Kit for Round Vacuum Desiccators, 230V each 732.00
Qty: