| Home Page | Abbreviated Contents | Customer Login | Quick Order / View Order | |
|---|---|---|---|---|
| Contact Us | Search | Indexes | Finish Order | |
|
The 108C Auto Carbon Coater is one of the most advanced sample coaters available
for coating non-conductive specimens prior to SEM X-ray analysis. The unique feedback-controlled rod evaporation system
gives multiple evaporations of around 20nm thickness without any need for rod shaping or adjustment. The high purity stepped
carbon rods used in the 108C Auto deliver a superior coating quality usable at high magnifications. The 108C is a compact
system, simple to operate and has very rapid pumping cycle time. The option of the MTM-10 High Resolution Thickness Monitor
allows conducting carbon films to be tailored to the exact requirements of the sample.
The 108C Auto Carbon Coater uses a novel evaporation supply. Current and voltage are monitored by sensor wires in the head, and the evaporation source is controlled as part of a feedback loop. The supply gives the conventional rod feed source excellent stability and reproducibility. Power consumption is low, and the source shows exceptional re-starting characteristics. The evaporation source can be operated in "pulse" or "continuous" modes. |
|
The 108C Auto Carbon Coater offers the choice of either manual or automatic operation.
In automatic mode, the evaporation source operates as a programmed voltage for a programmed time. The programmer is simply adjusted and displays voltage and time digitally. In manual mode, the unique 108C Auto Carbon Coater supply can be operated in "pulse" or "continuous" with the output voltage set using the rotary control.
The 108C Auto Carbon Coater can be fitted with an optional MTM-10 High Resolution
Thickness Monitor. Resolution is better than 0.1nm for carbon. Careful use of the monitor and evaporation controller
gives better than 5% reproducibility of coating thickness in the useful 15nm to 25nm range. |
||
|
Chamber shown with hinged top in the up-position |
Head with "Bradley type" carbon rod assembly |
 108C Auto Carbon Coater shown with the MTM-10 High Resolution Thickness Monitor (optional) |
| Prod # | Description | Unit | Price | Order / Quote | |||
|---|---|---|---|---|---|---|---|
| 108C Auto Carbon Coater, 115V* |
|
| ||||
| 108C Auto Carbon Coater, 220V* |
|
| ||||
| *The 108C Auto Carbon Coater includes: Specimen Table for 12 pin-mounts; operation manual | |||||||
PELCO easiShaper™, Motorized Carbon Rod Shaper 