SEM Pin Mount Specimen Holders

Cross-Sectional Holder

3.2mm pin (1/8") and flat point to allow easy angle changes. Insert specimens edge-on and observe the break directly. Accommodates sample thickness up to 6.35mm (1/4"). Non-magnetic stainless steel. Overall height is 30mm (1.2") from the pivot point. The clamping part is a 16mm (0.62") cube w/o thumb screws.

Prod #	Description	Unit	Price	Order / Quote
15325	Cross-Sectional Holder	each	$90.00	Qty:

Multi-Purpose Specimen Mount

compatible with 3.2mm pin stub holder
bulk or irregularly shaped specimens up to 25mm or 1"

Accepts up to 25mm (1") diameter metallurgical mounts. Material: machined aluminum with stainless steel allen set screws. Allen wrench included. Holder size is Ø31.5 x 11mm.

Prod #	Description	Unit	Price	Order / Quote
15305	Multi-Purpose Specimen Mount	each	$62.00	Qty:

Multi-Pin Specimen Mount

Accommodates up to four standard 12.7mm (1/2") pin stubs, with 3.2mm (1/8") diameter pin. Material: machined aluminum with stainless steel allen set screws. Allen wrench included. Holder size is Ø31.8 x 11.25mm. Diameter of Holder is 42mm.

Prod #	Description	Unit	Price	Order / Quote
15310	Multi-Pin Specimen Mount, 4 x 3.2mm	each	$49.00	Qty:

Multi Holder for 6 Pin Stubs

Accommodates up to six standard 12.7mm (1/2") pin stubs with 3.2mm (1/8') pin. Material: machined aluminum with stainless steel allen set screws. Allen wrench included. Diameter of Holder is 42mm.

Prod #	Description	Unit	Price	Order / Quote
15310-6	Multi Holder for 6 pin stubs	each	$76.00	Qty:

Multi Holder for 8 Pin Stubs

Accommodates up to eight standard 12.7mm (1/2") pin stubs with 3.2mm (1/8') pin. Material: machined aluminum with stainless steel allen set screws. Allen wrench included. Diameter of Holder is 50mm.

Prod #	Description	Unit	Price	Order / Quote
15310-8	Multi Holder for 8 pin stubs	each	$96.00	Qty:

Multi Holder for 12 Pin Stubs

Accommodates up to twelve standard 12.7mm (1/2") pin stubs with 3.2mm (1/8') pin on numbered positions. Material: machined aluminum with stainless steel allen set screws. Allen wrench included. Diameter of Holder is 62mm.

Prod #	Description	Unit	Price	Order / Quote
15310-12	Multi Holder for 12 pin stubs	each	$106.00	Qty:

Multi-Unit Specimen Mount

Holds five 9.5mm specimen mounts. Material: machined aluminum with stainless steel allen set screws. Allen wrench included. Holder size is Ø31.5 x 11.5mm

Prod #	Description	Unit	Price	Order / Quote
15315	Multi-Unit Specimen Mount, 5 x 9.5mm	each	$62.00	Qty:

Bulk Specimen Holder

Shown holding a mineral specimen. Maximum diameter of specimen area is 32mm (1.25"). Machined aluminum with short and long stainless steel allen set screws. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15308	Bulk Specimen Holder, 32mm, pin, aluminum	each	$90.00	Qty:

Large Bulk Specimen Holder

The large bulk specimen holder holds irregular or round specimens up to 51mm (2") diameter. Machined aluminum with short and long stainless steel allen set screws. Allen wrench included

Prod #	Description	Unit	Price	Order / Quote
15324	Large Bulk Specimen Holder, 51mm, pin, aluminum	each	$109.00	Qty:

Micro Vise

compatible with pin stub holder

A fast and clean way to hold specimens for SEM. The jaws are 25.4mm (1") wide. Maximum gap is 11mm (7/16"). Material: machined aluminum with stainless steel allen screw. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15340	Micro Vise, 3.2mm (1/8") pin	each	$115.00	Qty:

Thin Specimen Split Mount on Pin Stub

12.7mm (1/2") dia., 3.2mm (1/8") dia. pin
pin length .314" (8mm)

For examination of thin samples from textiles, plants, paper, plastics, metals, etc., in cross section. Special wide opening up to 6.4mm (1/4"). Grooved head. Material: machined aluminum with stainless steel allen set screw. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15330	Thin Specimen Split Mount, 1/2", 8mm L pin	each	$31.50	Qty:

Thin Specimen Split Mount (AMRAY)

12.7mm (1/2") dia., 3.2mm (1/8") dia. pin
pin length 14.3mm (9/16")

Opens to 6.4mm (1/4"). Material: machined aluminum with stainless steel allen set screw. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15331	Thin Specimen Split Mount, AMRAY	each	$25.00	Qty:

Thin Specimen Split Mount
(ISI, TOPCON, JEOL)

Double hex screw tightening for a firm hold, fits directly into ISI, TOPCON or JEOL, 15mm (.591") dia. x 10mm (.394") high. Material: machined aluminum with stainless steel allen set screws. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15335	Thin Specimen Split Mount, 15mm	each	$24.00	Qty:

Set Screw Vise

Single stainless steel set screw into an open slot that is 4mm (.157") wide x 5mm (.197") deep.
12.7mm (1/2") dia. x 17.7mm (0.70") high. Material: machined aluminum with stainless steel allen set screw. 3.2mm (1/8") dia. pin. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
16350	Set Screw Vise, 12.7mm	each	$19.60	Qty:

SEM Bulk Specimen
Mount Holder

clamps bulky, irregular samples

Opening is 15.9mm (5/8") wide x 25.4mm (1") long x 9.5mm (3/8") deep. 3.2mm (1/8") dia. pin. Material: machined aluminum with stainless steel allen set screws. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15320	PELCO® SEM Bulk Specimen Mount Holder	each	$82.00	Qty:

Metallurgical Mount Holders

Metallurgical Mount Holder, 25mm (1")

Specimen holder for 25mm (1") metallurgical mounts. Standard pin stub 3.2mm (1/8"). Material: machined aluminum with stainless steel allen screws. Opening is 25.5mm dia. x 7.9mm deep (1.04" dia. x .31" deep) Allen wrench included. Shown holding a specimen, right.

Prod #	Description	Unit	Price	Order / Quote
15304	Metallurgical Mount Holder, 25mm (1") dia., 3.2mm (1/8") dia. pin	each	$49.00	Qty:

Metallurgical Mount Holder, 31.8mm (1-1/4")

Accepts the standard 31.8mm (1-1/4") metallurgical specimen mount with minimum 0.8mm (1/32") clearance. 3.2mm (1/8") pin . Depth = 8mm (5/16"). Material: machined aluminum with stainless steel allen set screw. Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15307	Metallurgical Mount Holder, 31.8mm (1-1/4") dia., 3.2mm (1/8") dia. pin	each	$59.00	Qty:

Metallurgical Mount Holder, 38.1mm (1-1/2")

Specimen holder for 38.1mm (1-1/2") metallurgical mounts. Standard pin stub 3.2mm (1/8"). Material: machined aluminum with stainless steel allen screws. Opening is 39mm dia. x 7.8mm deep (1.536" dia. x .307" deep) Allen wrench included. Shown holding a specimen, bottom.

Prod #	Description	Unit	Price	Order / Quote
15306	Metallurgical Mount Holder, 38.1mm (1.5") dia., 3.2mm (1/8") dia. pin	each	$73.00	Qty:

Metallurgical Mount Holder, 50.8mm (2")

Specimen holder for 50.8mm (2") metallurgical mounts. Standard pin stub 3.2mm (1/8"). Material: machined aluminum with stainless steel allen screws. Opening is 51.9mm dia. x 7.87mm deep (2.043" dia. x .310" deep) Allen wrench included.

Prod #	Description	Unit	Price	Order / Quote
15298	Metallurgical Mount Holder, 50.8mm (2") dia., 3.2mm (1/8") dia. pin	each	$79.00	Qty: