in 

FIB Supplies

omniprobe®

Consumables and Supplies

The complete range of accessories, consumables and lift-out grids for the Omniprobe AutoProbe™ 100, 200, 250 and 300 tools used on FIB and SEM/FIB systems such as FEI DualBeam™, ZEISS CrossBeam® / NVision, TESCAN FIB-SEM, and JEOL JIB-4500.


Omniprobe AutoProbe™ Tip
Omniprobe AutoProbe™ Tip
Omniprobe AutoProbe™ Tip
Omniprobe AutoProbe™ Tip
Omniprobe
AutoProbe™ Consumables
omniprobe lift-out grid with 4 posts
Omniprobe® Lift-Out Grids
Low Profile Double TEM Grid Holder
Low Profile Double TEM Grid and Single Sample Holder Omniprobe
AutoProbe™ Sample Holders



AutoProbe™ Consumables

There is a wide selection of original Omniprobe probe tips available for the different generations of Omniprobe AutoProbe™ systems:




Tip with Ni Shank for AutoProbe™ 100 & 200

Tip with Ni Shank for AutoProbe™ 100 & 200

Custom probe tip design for the AutoProbe™ 100 & 200 systems. Nickel tube shank with a diameter of 0.508mm (0.020") and a tungsten tip with a diameter of 76µm (0.003"). Tip radius is 0.5µm with a 13° taper angle for maximum lifetime. Nickel shank ~33.25mm (1.31") long. Tungsten tip ~35.5mm (1.40") with the tungsten whisker starting at 2.3mm (0.090") from the tip.

Prod # Description Unit Price Order / Quote
460-101 Tip with Ni shank for the Omniprobe AutoProbe™ 100 & 200 pkg/10 $245.00
Qty:




Standard W Probe Tips for AutoProbe™ 100 & 200

Standard W Probe Tips for AutoProbe™ 100 & 200

Custom probe tips for the AutoProbe™ 100 and 200 systems. All Tungsten design with a tip radius of 0.5µm and a 10-13° taper angle for maximum life time. Shank diameter is 0.508mm (0.020").

Prod # Description Unit Price Order / Quote
460-102 Standard W Tip for the Omniprobe AutoProbe™ 100 & 200 pkg/10 $122.00
Qty:




Narrow W Probe Tips for AutoProbe™ 100 & 200

Standard W Probe Tips for AutoProbe™ 100 & 200

Custom narrow probe tips for the AutoProbe™ 100 and 200 systems. All Tungsten design with a sharper tip radius of <0.5µm and a 8-10° taper angle. Shank diameter is 0.508mm (0.020").

Prod # Description Unit Price Order / Quote
460-106 Narrow W Tip for the Omniprobe AutoProbe™ 100 & 200 pkg/10 $170.00
Qty:




Probe Tips for in situ Tip Exchange for AutoProbe™ 300 & 400

Tip Exchange for AutoProbe™ 300 & 400

Custom probe tips for the AutoProbe™ 300 system for in situ probe tip exchange systems. Tungsten tip with stainless steel shank, tip radius is 0.5µm with an 8-10° taper angle.

Prod # Description Unit Price Order / Quote
460-103 in situ probe tips for the Omniprobe AutoProbe™ 300 & 400 pkg/20 $478.60
Qty:




Keyed Probe Tips for the AutoProbe™ 300 & 400

Keyed Probe Tips for the AutoProbe™ 300 & 400

Custom keyed probe tips with a flat on the collar for secure positioning in the Omniprobe AutoProbe™ 300/400 probe tip holder. Tungsten tip with stainless steel shank, flat on collar, tip radius is 0.5µm with an 8-10° taper angle.

Prod # Description Unit Price Order / Quote
460-107 Keyed Probe tips for the Omniprobe AutoProbe™ 300 & 400 pkg/20 $391.80
Qty:




AutoProbe™ 300 & 400 Probe Tips for the FEI Helios Front Port

AutoProbe™ 300 & 400 Probe Tips for the FEI Helios Front Port

Custom probe tips for the Omniprobe AutoProbe™ 300/400 systems with a reduced collar diameter to accomodate the 50 elevation angle on the FEI Helios front port systems. Tungsten tip with stainless steel shank, smaller collar, tip radius is 0.5µm with an 8-10° taper angle.

Prod # Description Unit Price Order / Quote
460-108 Omniprobe AutoProbe™ 300 & 400 Probe Tips for the FEI Helios Front Port pkg/20 $362.00
Qty:




Keyed AutoProbe™ 300 & 400 Probe Tips for the FEI Helios Front Port

Keyed AutoProbe™ 300 & 400 Probe Tips for the FEI Helios Front Port

Custom keyed probe tips for the Omniprobe AutoProbe™ 300/400 systems with a flat on the reduced collar diameter to accomodate the 50 elevation angle on the FEI Helios front port systems. Tungsten tip with stainless steel shank, flat on smaller collar, tip radius is 0.5µm with an 8-10° taper angle.

Prod # Description Unit Price Order / Quote
460-109 Keyed Omniprobe AutoProbe™ 300 & 400 Probe Tips for the FEI Helios Front Port pkg/20 $405.02
Qty:




Tips for AutoProbe™ 250 & 200 Equipped with Short-Cut-Box

Tips for AutoProbe™ 250

Custom probe tips for the AutoProbe™ 250 & 200 systems. Compatible with short-cut. All-tungsten design with a 0.508mm (0.020") shank diameter. The tip radius better than 0.5µm with a taper of 6° taper angle for greater precision.

Prod # Description Unit Price Order / Quote
460-105 W tips for the Omniprobe AutoProbe™ 250 & 200 with Short-Cut pkg/10 $150.00
Qty:




AutoProbe™ AP250 Probe point Holder

AutoProbe™ AP250 Probe point Holder

Custom probe tip holder for use with the Autoprobe™ AP250 probe tip - #460-105.

Prod # Description Unit Price Order / Quote
460-104 Omniprobe Autoprobe™ AP250 Probe Tip Holder each $628.00
Qty:




Omniprobe® Lift-Out Grids

The Omniprobe® Lift-Out Grids are specifically designed to accept the TEM lamellas milled out by FIB or SEM/FIB systems. Typical thickness of the grids is 25-30µm with a diameter of 3mm. The posts are designed for optimum access and provide a secure area for attaching (welding) the lamella(s). The Omniprobe® grids fit standard TEM holders and provide a non-obscured view of the thin sections attached to the posts.
Available in standard Cu with 3, 4 and 5 posts and in Mo With 3 and 4 posts. All Lift-Out Grids have multiple indexed mounting positions for easy identification and positioning in the TEM. Also look at the PELCO® FIB Liftout Grids.

omniprobe lift-out grid with 3 posts

Prod # Description Unit Price Order / Quote
460-203 Omniprobe® Lift-Out Grids, Cu with 3 posts pkg/100 $207.00
Qty:
460-2033 Omniprobe® Lift-Out Grids, Cu with 3 posts, shallow downset pkg/100 124.00
Qty:
460-223 Omniprobe® Lift-Out Grids, Mo with 3 posts pkg/25 300.00
Qty:
Omniprobe Lift-Out Grids, Cu with 3 posts and side access

Prod # Description Unit Price Order / Quote
460-2031-S Omniprobe® Lift-Out Grids, Cu with 3 posts and side access pkg/100 $124.00
Qty:
omniprobe lift-out grid with 4 posts

Prod # Description Unit Price Order / Quote
460-204 Omniprobe® Lift-Out Grids, Cu with 4 posts pkg/100 $207.00
Qty:
460-224 Omniprobe® Lift-Out Grids, Mo with 4 posts pkg/25 300.00
Qty:
omniprobe lift-out grid with 5 posts

Prod # Description Unit Price Order / Quote
460-205 Omniprobe® Lift-Out Grids, Cu with 5 posts pkg/100 $227.00
Qty:
Omniprobe Beryllium Half Ring Grid

Prod # Description Unit Price Order / Quote
460-206 Omniprobe® Beryllium Half Ring Grids, Be pkg/10 $686.50
Qty:




GSB-100 Storage Box for FIB Lift Out Grids

GSB-100 Storage Box for FIB Lift Out Grids

GSB-100 Storage Box for 100 FIB lift out grids or storing standard 3mm TEM grids flat.
No adhesive in tray (made from ABS). Cavity size is 3.34 x 3.34 x 1.5mm (0.13" x 0.13" x 0.06"). Complete with clear polystyrene lid and clear polypropylene clip. Stackable.

Overall size is 55 x 51 x 10.7mm (2.16" x 2" x 0.42")

Prod # Description Unit Price Order / Quote
460-200B GSB-100 Storage Box for 100 FIB Lift Out Grids each $7.50
Qty:




anti-static gsb-100 storage box for 100 grids

Anti-Static GSB-100 Storage Box for FIB Lift Out Grids

Same internal and external dimensions as standard GSB-100 storage box, but with anti-static tray made of black conductive polypropylene. Complete with anti-static cover and polypropylene clip. Stackable.

Overall size is 55 x 51 x 10.7mm (2.16" x 2" x 0.42")

Prod # Description Unit Price Order / Quote
460-200SD Anti-Static GSB-100 Storage Box for 100 FIB Lift Out Grids each $8.50
Qty:




FIB Grid Box with Lid for lift-out or half grids

PELCO® FIB Grid Box for Lift-Out Grids or Half Grids

Four position grid box with lid for holding FIB lift-out grids or half grids. The PELCO® FIB Grid Box cavity depth is only 1.7mm, thus preventing the grids from rotating in the diamond shaped cavity. The FIB grids can be relatively easily loaded/unloaded using sharp tweezers.

Prod # Description Unit Price Order / Quote
160-54 4 Position PELCO® FIB Grid Box with Lid each $10.85
Qty:





Auto-Probe™ Accessories

A number of accessories are available for assisting in FIB milled TEM lamella lift-out procedures.

Alternative and cost-effective option: PELCO® FIB Sample Prep Holders

Low Profile Double TEM Grid Holder

460-316 Low Profile Double

Low Profile Double TEM Grid Holder

The Low Profile Double TEM Grid Holder holds two lift-out grids and has a spring-loaded jaw for easy unloading. This holder has a short standard pin style post base: ø3.2 x 4mm length (1/8" x 0.15") to accommodate thinner-type stage plates used in full wafer systems. Made of aluminum and all non-magnetic materials.

Prod # Description Unit Price Order / Quote
460-316 Low Profile Double TEM Grid Holder, Al each $968.75
Qty:




Low Profile Double TEM Grid and Sample Holder

460-318 Low Profile Double TEM
Grid and Sample Holder, Al

Low Profile Double TEM Grid and Sample Holder

TEM grid and sample holder for FIB and SEM/FIB (DualBeam™ and CrossBeam®) systems with stations for 2 TEM lift-out grids and 2 sample mounts. This holder has a standard pin style post base: ø3.2 x 8.1mm length (1/8" x 0.32") compatible with most standard pin stub holders. Made of aluminum jaws and non-magnetic materials.

Prod # Description Unit Price Order / Quote
460-318 Low Profile Double TEM Grid and Sample Holder, Al each $1200.00
Qty:




Low Profile Double TEM Grid and Single Sample Holder

460-319 Low Profile Double TEM
Grid and Single Sample Holder, Al

Low Profile Single Sample and Grid Holder

Single sample and TEM grid holder for FIB and SEM/FIB systems with stations for two TEM lift-out grids and one sample mount. This holder has a standard pin style post base: 3.2 x 8.1mm (1/8" x 0.32") compatible with most standard pin stub holders. Made of aluminum and non-magnetic materials.

Prod # Description Unit Price Order / Quote
460-319 Low Profile Double TEM Grid and Single Sample Holder, Al each $1376.50
Qty: