in 

back to Embedding Overview
Silicone Molds Overview

PELCO® Single End and Double End, Tapered,
Flat Embedding Molds

sample preparation for electron microscopy

Flat Embedding Mold, Single End, Blue, White or Translucent
Small Flat Embedding Mold, Single End (thicker)
110 Flat Embedding
21 Cavity Single End
Double End, Tapered
10590 Double End Mold
111 LDPE Flat Embedding Mold, Disposable

Technical Tip:
All PELCO® Silicone Rubber Molds are made from the highest quality silicone rubber available. With care they will last a long time. After polymerization in a 60° C oven, let molds cool before removing blocks. This precaution will increase the lifespan of the mold. Using silicone rubber with Spurr's Resin will significantly reduce the lifespan of the molds. Maximum temperature: 218°C (425°F).


PELCO® Flat Embedding Molds - Blue, White or Translucent

 
flat embedding mold white mold translucent mold
embedding mold 105

Alphanumeric self-impression cavities, pretrimmed end.
Available in blue, white, or translucent silicone rubber.
Maximum temperature: 218°C (425°F).

Design: R.F. Bils

Number of cavities: 24
Numbering: A1- A6, B1-B6, C1-C6, D1-D6
Special cavities: 2 troughs - 1 x 3cm x 3mm deep
1 trough - 1 x 1.7cm x 3mm deep
Mold size: 105 x 70 x 7mm thick

Prod # Description Unit Qty Price Order / Quote
105 PELCO® Flat Embedding Mold, Blue each 1-9 $18.20
Qty:
10+ 15.17
105-2 PELCO® Flat Embedding Mold, White each 1-9 11.75
Qty:
10+ 10.31
10504 PELCO® Flat Embedding Mold, Translucent each 1+ 10.90
Qty:




Small Flat Embedding Mold

embedding mold embedding mold 106

Designed for thicker specimens. Blue silicone rubber, no numbering.
Maximum temperature: 218°C (425°F).

Number of cavities: 12
Mold size: 80 x 45 x 7mm thick

Prod # Description Unit Price Order / Quote
106 PELCO® Small Flat Embedding Mold each $13.25
Qty:




110 Flat Embedding Mold

flat embedding mold embedding mold 110

Consecutive numbering, pretrimmed end, blue silicone rubber.
Maximum temperature: 218°C (425°F).

Number of cavities: 20
Numbering: 1-20
Mold size: 89 x 76 x 7mm thick

Prod # Description Unit Price Order / Quote
110 PELCO® 20 Cavity Embedding Mold each $16.95
Qty:




21 Cavity EM Embedding Mold

embedding mold cavity em embedding mold

Single pretrimmed end with consecutive numbering. Blue silicone rubber.
Maximum temperature: 218°C (425°F).

Number of cavities: 21
Numbering: 1-21
Mold size: 74 x 61 x 6mm thick

Prod # Description Unit Price Order / Quote
10505 PELCO® 21 Cavity EM Embedding Mold each $16.25
Qty:




Double End Tapered Embedding Mold

tapered embedding mold double end embedding mold

Pretrimmed double ends for each cavity, doubling specimen capacity. Consecutive numbering, blue silicone rubber.
Maximum temperature: 218°C (425°F).

Number of cavities: 24
Numbering: 1-24
Mold size: 67 x 85 x 7mm thick

Prod # Description Unit Price Order / Quote
10535 PELCO® Double End Mold each $11.85
Qty:




10590 Double End Mold

double end mold double end mold

Double pretrimmed ends, consecutive numbering, blue silicone rubber.
Maximum temperature: 218°C (425°F).

Number of cavities: 21
Numbering: 1-21
Mold size: 72 x 62 x 6mm thick

Prod # Description Unit Price Order / Quote
10590 PELCO® Double End Mold each $14.25
Qty:

 

 

PELCO® 111 LDPE Flat Embedding Mold, Disposable

111 LDPE Flat Embedding Mold

Completely disposable, translucent, low density polyethylene. Single use avoids cross contamination. Flexible for easy block removal. Economic alternative to silicone molds.
Maximum temperature for normal embedding processes: 80°C (176°F).
Maximum temperature for short duration: 95°C (203°F).

Number of cavities and size:
   14 for 1/8" x 1/4" x 1/2" blocks
   10 for 1/8" x 3/8" x 3/4" blocks

Mold size: 111 x 76 x 6.4mm thick (4 3/8" x 3" x 1/4")

Sold in package of 10 molds

Prod # Description Unit Price Order / Quote
111 PELCO® LDPE Flat Embedding Mold, Disposable pkg/10 $14.60
Qty: