in 

back to Embedding Overview
Silicone Molds Overview

PELCO® Pyramid-Tip Mold, Square Face Embedding Mold
and Mounting Cylinders

molds for specimen embedding for microscopy



specimen embedding mold pyramid embedding mold

Pyramid-Tip Mold

Excellent for sample preparation of specimens which are difficult to orient. The tips easily and quickly attach to plastic cylinders. When tip is mounted it is identical in dimensions to a BEEM® 00 size capsule. Blue silicone rubber.
Maximum temperature: 218°C (425°F).
See our Cyanoacrylate Fast-Glue and Mounting Cylinders.

Number of Cavities: 30
Numbering: OUTSIDE of Cavities, 1-30
Mold Size: 61 x 72 x 6mm thick

Prod # Description Unit Price Order / Quote
10585 PELCO® Pyramid-Tip Mold each $14.95
Qty:



embedding moldembedding mold

3mm Square Face Mold

for embedding larger specimens, uses less resin

With this mold a larger specimen may be placed in a wider tip area resulting in a larger initial section. Once solidified the block may be glued to the end of a plexiglas rod or other holding device. (See Mounting Cylinders.) Blue silicone rubber.
Maximum temperature: 218°C (425°F).

Number of Cavities: 30
Numbering: Outside of cavities, 1-30
Block Faces: 3 x 3mm
Mold Size: 61.5 x 72 x 6mm thick

Prod # Description Unit Price Order / Quote
10586 PELCO® 3mm Square Face Mold each $14.95
Qty:

mounting cylindersPyramid Tip Embedment, sample preparation placement on Cylinder Mount


go to Mounting Cylinders